Sep 1, 2006 #1 kevlar49 Materials Jun 1, 2006 287 When applying the rules of ASME VIII UCS 66 to determine the MDMT, do you include the corrosion allowance in the tg for design?
When applying the rules of ASME VIII UCS 66 to determine the MDMT, do you include the corrosion allowance in the tg for design?
Sep 2, 2006 1 #2 prex Structural Jul 4, 2000 1,917 Thicknesses as used in UCS-66 are nominal ones, hence CA is not deducted; see also note 1 to Fig.UCS-66.2. prex http://www.xcalcs.comOnline tools for structural design Upvote 0 Downvote
Thicknesses as used in UCS-66 are nominal ones, hence CA is not deducted; see also note 1 to Fig.UCS-66.2. prex http://www.xcalcs.comOnline tools for structural design
