Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

WOOD RETAINING WALL DESIGN 2

Status
Not open for further replies.

VBI

Civil/Environmental
Nov 6, 2001
51
Can anyone direct me to design aids for wood retaining walls? Charts/software etc.? I am designing an 8' high wall with no-slope or surcharge behind. I will replace clay soils behind with drainable bankrun or the like...

Thank you ...
 
Replies continue below

Recommended for you

SlideRuleEra,

An excellent link BUT when I tried to print it out I got unintelligible garble. Is this Australian publication perhaps coded in some way that makes it un printable on U.S. based computers ? Should I copy and paste it into Adobe Reader perhaps ?

still, it was worth the star.
 
thanks sliderule, i'll try that. it may not be very useful here in Oregon since the Wallabies and Eucalyptus trees left during the Cretaceous.

I'll bet my K&E Log Log Decitrig to your Picket Pocket Model that i can find some use for it when global warming takes full effect though.
 
Its hard to believe that this is the only reference around...I've seen it already. Such a common retaining wall with such little design reference. No wonder they fail so commonly. Thanks for your help. I've hit some college libraries and still nothing.
 
"Such a common retaining wall with such little design reference. No wonder they fail so commonly."

It is suggested that they fail NOT because little is known or published about how to design them but rather because:

Wood is a natural material with widely varied properties

Not all important properties can be predicted

These properties change with time and loading

wood can be attacked by insects, water, weather, plants (tree roots for example), chemicals, rot, and burrowing animals

good quality, durable heart grade wood is expensive and hard to find

walls are often subject to overloads, such as heavy equipment, which were not anticipated in the design
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor