Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

wooden mast

Status
Not open for further replies.

shermick

Marine/Ocean
Dec 7, 2002
2
0
0
PL
I want to replace stayed aluminum mast (as stated in a plan) with diy unstayed wooden hollow mast to rig a junk type sail. Can anybody advice what diameter the mast shoud have, provided it must be somewhere in 12 meters (36 foot) lenght. Any information or link to appropriate site very welcome. Shermick
 
Replies continue below

Recommended for you

Try "Skenes Elements of Yacht Design", out of print, but one of the best references for Naval Architecture. It should have some basic guidelines. Now why would one want to do such a thing is another issue.
 
Status
Not open for further replies.
Back
Top