Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Workbench / Body Operation / Static Structural

Status
Not open for further replies.

Kanterbrau

Mechanical
Joined
Jan 29, 2010
Messages
9
Location
FR
Hello,
I'm doing a study on ansys workbench, I work with a 2D axisymetric model. My model is composed of a surfacic body (a sort of "S", and others bodies built with a linear pattent of the first one. I "forme a new part" and I do a boolean operation "Unify". My problem is when I lauch the calculation in static structural, the strain is only on the first body, the other bodies are not linked to the first one, despite my boolean operation...Anybody could help me? By the way, is it possible to do only 1D mechanical study ? I tried but it didn't want to lauch the calculations!

Thanks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top