Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Working with Technical and Non technical Peoples

Status
Not open for further replies.

CREERAAM

Mechanical
Feb 23, 2015
109
Hai

How to get good job in Good Engineering valued company? Difference between Working with Nontechnical peoples and Technical peoples?

REGARDS,

G.SRIRAM.

Dream,Dream,Dream Dream transforms in to thoughts.And thoughts result in action
 
Replies continue below

Recommended for you

1) There ain't no Sanity Clause.

2) Technical people are slightly more difficult to insult, but exceptions exist.


Mike Halloran
Pembroke Pines, FL, USA
 
I'd prefer to work for technical supervisors, because explaining to no-technical people can be very frustrating.
 

Thanks for your comments

Am facing Here problem with the production supervisor he is don't know nothing on welding but he is giving acceptance on weldment defects Pin hole is accepted?

REGARDS,

G.SRIRAM.

Dream,Dream,Dream Dream transforms in to thoughts.And thoughts result in action
 
Does the production supervisor have an MBA?

 
Does the Production Supervisor own the company?
Do you?
Does the owner give a crap?
Does your government give a crap?
Does your market give a crap? I.e., are you selling welded products where the welds are assumed to be competent and/or regulated in some way?



Mike Halloran
Pembroke Pines, FL, USA
 
It can be better or worse depending how much faith a non-technical has in your engineering judgement.
 
Mr.Maui

No he is uneducated by experience he is in this position.

Straight way i hold the pipe and said to clear the pipes after view the pipes by an welding engineer. if there is any possibility to do repair or acceptance by standard.



REGARDS,

G.SRIRAM.

Dream,Dream,Dream Dream transforms in to thoughts.And thoughts result in action
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor