works at 2500F adhesive

[ebirinci]

Hi,
I'm looking for an adhesive to hold the wire in place. this adhesive has to be at 2500F , don't give off any gas, and has to cure fast. do you have any suggestions.

 

[racookpe1978]

Welded clips.

Except few metals themselves retain strength at that high a temperature.

Screw it down with Ti mounts and screws or nuts.

 

[ebirinci]

we don't want to weld. that wire is wrapping the cylinder. we want to glue the wire

 

[ornerynorsk]

Check out ceramic adhesives.

It is better to have enough ideas for some of them to be wrong, than to be always right by having no ideas at all.

 

[ebirinci]

thank you

 

[EdStainless]

We used these for anchoring lead wires on resistance heating elements

http://www.sauereisen.com/ProductIndex.aspx

= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, Plymouth Tube

 

[ebirinci]

I found ceramic adhesive

http://www.cotronics.com/vo/cotr/ca_fastset.htm

this is what I was looking for