Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Writing/Viewing Chinese in UG

Status
Not open for further replies.

Froggy00

Automotive
Jan 21, 2004
8
How do you view/edit/write chinese in UG? I have heard that UG can handle Chinese but I don't know how-to. Your help is appreciated. Thank you

Allan
 
Replies continue below

Recommended for you

For the environment (menus, toolbars, text output windows, etc.) to appear in Chinese, that is dependant upon your operating system.

UG supports 2 different font files for drafting & plotting data.

-chinesef: This font encodes the Simplified Chinese characters in codeset GB2312. This is a fixed width font.

-chineset: This font encodes the Traditional Chinese characters in codeset BIG5. This is a fixed width font.

Should you need more assistance, I'd suggest referring to the documentation CD's that come with UG or give GTAC a call.

Tim Flater
Senior Designer
Enkei America, Inc.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor