zemax model of unstable resonator 1

[Timelord]

Any zemax users out there that could help me model an unstable resonator? I'm a zemax novice and I am having trouble modeling an unstable resonator configuration. The resonator uses an annular setup with a scraper mirror for the output. The mode volume and the hole in the scraper mirror are square.

 

[artie14]

I have a similar interest in unstable resonators and just started working with ZEMAX. I am interested to know what resulted from this inquiry 2 years ago.

artir14

 

[Timelord]

I never got any feedback and I never was able to successfully model the resonator. I had to assume a divergence angle and beam profile and used that to model the rest of the optical system.

Timelord