Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Zero Force Termination BC

Status
Not open for further replies.
mmmbordo643

mmmbordo643

New member
Joined
Feb 24, 2006
Messages
31
Location
US
Is there a way to add a spring to a compaction analysis and force the analysis to stop when the force in that spring is zero? This would happen as the part being compacted is allowed to relax. All that help on this forum are doing a great job and have taught me so much. Thanks!

Chris
 
Status
Not open for further replies.

Similar threads

omega_heiki
  • Locked
  • Question Question
Submodeling from pie-slice with symmetric BC
Replies
4
Views
1K
omega_heiki
omega_heiki
M
  • Locked
  • Question Question
Impact force
Replies
3
Views
3K
FEA way
FEA way
F
  • Question Question
Purpose of Reaction Force in ABAQUS
Replies
2
Views
2K
FEA way
FEA way
N
  • Locked
  • Question Question
Force vs displ
Replies
17
Views
3K
FEA way
FEA way
B
  • Locked
  • Question Question
Concentrated Force on a Rigid body reference point
Replies
2
Views
3K
Vishakh_Rajendran
Vishakh_Rajendran

Part and Inventory Search

Sponsor

Back
Top