sloth4z
Mechanical
- Aug 12, 2003
- 132
I have a multibody part with different materials. The stress plot shows the yield strength on the axes with a red arrow. The yield strength it shows is for "Body 1". How do I change which body's yield stress is shown on the axes? How do I remove the arrow altogether?
For example: say "Body 1" is plain carbon steel (yield = 32,000 psi), and "Body 2" is alloy steel (yield = 90,000 psi). In this case I am not worried if "Body 1" yields, and so on the plot I want it to show the yield strength is at 90,000 psi (or not show the yield strength at all).
I know I could use an assembly to remove the yield stress, but that seems like a waste of time and space if I could just change a property somewhere.
For example: say "Body 1" is plain carbon steel (yield = 32,000 psi), and "Body 2" is alloy steel (yield = 90,000 psi). In this case I am not worried if "Body 1" yields, and so on the plot I want it to show the yield strength is at 90,000 psi (or not show the yield strength at all).
I know I could use an assembly to remove the yield stress, but that seems like a waste of time and space if I could just change a property somewhere.