Mirroring part brings no hole information

arcticcatmatt · Dec 9, 2008

How come when your mirror a part thru a plane, none of the hole information goes with it. So, when I try to create a drawing of a mirrored part and use the hole callout, junk.

Eltron · Dec 9, 2008

Are you talking about mirroring parts in assys or mirroring features in parts? I don't see the behavior you are talking about when I mirror features in a part. The problem might come up in a drawing if you try to put a hole call-out on the same (mirrored feature), but you can still do it as far as I can tell.

Dan

http://www.eltronresearch.com

Dan's Blog

arcticcatmatt · Dec 9, 2008

I take a square block with 3 1/4-20 holes in it. I then mirror it so I can get a left hand part.

I go to dimension the new left hand part and use the hole call out and the link has been lost. It does not call it out properly as a 1/4-20.

CorBlimeyLimey · Dec 9, 2008

Works for me!

Which version of SW?

Are you selecting the body or features to mirror?

[cheers]

arcticcatmatt · Dec 10, 2008

It has never worked for us. Must be we have a setting wrong.

SW 2009 x64 SP 1.0

(example) - I make a block. Put 2 1/4-20 holes in the top of it. Click a surface on the right hand of the block, click "insert, mirror part", put a check mark in all boxes (Except for the lose link to original part box). Now I have a "right hand" part (mirrored part). I make a drawing, and use the hole callout button on the holes.. and it just says .177 (depth) .557. There is no mention of 1/4-20 or quantity of 2.

Eltron · Dec 10, 2008

I see the same behavior. It looks like the Hole wizard holes in a mirrored part are transferred as cosmetic threads. Strange one.

Dan

http://www.eltronresearch.com

Dan's Blog

CorBlimeyLimey · Dec 10, 2008

Ahhh, so you must be talking about mirroring a part in an assy. The wording in your OP and second post suggested you were making the mirror at the part level. The HW info is transferred when mirrored at the part level and the Hole Callout works.

AFAIK, the non-transfer of HW info at the assy level has always been an issue.

[cheers]

arcticcatmatt · Dec 10, 2008

^ No. I am doing this at the part level Cor.

As I said. "I make a block"... that is at the part level.

I have never mirrored an assembly.

CorBlimeyLimey · Dec 10, 2008

Then I am very confused as to how you are able to "put a check mark in all boxes (Except for the lose link to original part box)".

When I Insert > Pattern?Mirror > Mirror I only see options to select features, faces, or bodies to mirror. The only "check mark" options are for Merge Solids, Knit surfaces and Propagate material properties.

Anyway if I use the Bodies to Mirror option and select the block in the graphics area, it works for me with SW09-SP1 x32.

[cheers]

CorBlimeyLimey · Dec 10, 2008

... and here's the drawing.

[cheers]

CorBlimeyLimey · Dec 10, 2008

OK, I just re-read your second post and it finally sunk-in that I was using the other mirror function. (another premature seniors moment) :O(

However, using the correct Insert > Mirror Part function you specify, still works for me.

[cheers]

CorBlimeyLimey · Dec 10, 2008

Try this.

JMarv · Dec 10, 2008

Matt,

I have never seen this work. Would be a nice enhancement request.

Joe
SW Office 2008 SP5.0
P4 3.0Ghz 3GB
ATI FireGL X1

arcticcatmatt · Dec 10, 2008

I found a difference. The mirrored part from CorBlim contains the 1/4-20 holes.

The mirrored part that my PC creates does not. See attached.

Look at Mirrored part and Look at Mirrored part from ACM. Mine does not have the tapped holes in the feature tree but CorBlims file does. What the heck.

arcticcatmatt · Dec 10, 2008

Dang it. I have never attached a folder before. I tried and it attached a drawing. I don't know how to attach a folder.

here is my mirrored part. It is referencing corblims part so you will have to have his file to view it also of course.

arcticcatmatt · Dec 10, 2008

You used body-move/copy and mirror part somehow.

Corblim walk me/us thru this work around! I have been doing "insert, mirror part" for years and having it NOT transfer holes. I am talking parts with 500 holes in them!

Either we are doing it wrong or it would make a great enhancement request.

CorBlimeyLimey · Dec 10, 2008

The body-move/copy appeared automatically. I did nothing special to create it. I will create and upload a video capture if I get chance.

You need to ZIP (or RMB and Send to > Compressed (zipped) Folder) before uploading.

[cheers]

arcticcatmatt · Dec 10, 2008

^ Ok I figured it out.

You are doing
- Click surface to mirror thru
- Insert
--Mirror part
---check all boxes including break link to original part

The mirror part is made and it retains all the hole information. The only downside is that if you update the left hand part, the right hand part does not reflect the change.

arcticcatmatt · Dec 10, 2008

Man I wish I could just edit my posts.

I just submitted an enhancement request.

It should work with just insert, mirror part, and keep all features and references to the other hand part.

JMarv · Dec 10, 2008

Ok I figured it out.

Now I see it too. If you keep the link to the original part, the HW info is not retained; but if you break the link, it is. That's odd.

Joe
SW Office 2008 SP5.0
P4 3.0Ghz 3GB
ATI FireGL X1

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Mirroring part brings no hole information

Mechanical

Recommended for you

Mechanical

Mechanical

Mechanical

Mechanical

Mechanical

Mechanical

Mechanical

Mechanical

Mechanical

Mechanical

Mechanical

Mechanical

Mechanical

Mechanical

Mechanical

Mechanical

Mechanical

Mechanical

Mechanical

Similar threads

Log in

Part and Inventory Search

Sponsor