Welds in Inventor 2010

• Sep 29, 2010

• #2

rollupswx

Mechanical

Dec 31, 2007

918

Depends on what "wrap" means. My guess is probbably - but post example and be sure.

 

Upvote 0 Downvote

• Sep 30, 2010

• Thread starter
• #3

DGRobinson

Industrial

Sep 29, 2010

3

Not quite sure how to post an example . but maybe I can try and explain, when attempting to weld a 3 sides of a piece, I choose the surfaces to be welded but at the end where 3 surfaces meet, the welds are not connected to each other. it kind of leaves a space. best explaination I got unfortunatly.

 

Upvote 0 Downvote

• Sep 30, 2010

• #4

rollupswx

Mechanical

Dec 31, 2007

918

Not quite sure how to post an example...

Click to expand...

Put the assembly into a folder.
In Windows Explorer right click on the folder and select Send to Compressed (zipped) Folder.
Reply here and click on the ...or upload your file to Engineering.com link below and select the zip file.

 

Upvote 0 Downvote

• Oct 1, 2010

• #5

EngAddict

Mechanical

Oct 1, 2009

410

So the corners are missing?

If you create the weld in one operation it will be continuous. i.e. select all 3 faces for bead face 1 and the face you are attaching to for bead face 2.

 

Upvote 0 Downvote

• Oct 4, 2010

• Thread starter
• #6

DGRobinson

Industrial

Sep 29, 2010

3

That might do the trick, ill give it a shot

 

Upvote 0 Downvote