Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Element picking 1

Status
Not open for further replies.
Grozozo

Grozozo

Student
Feb 8, 2022
11
Hello there!

Very stupid question. How to pick couple of elements just by entering their IDs in ID field in Entity Selection in order to highlite those elements? I am using Femap. And when i entering first element ID, after presing Enter botton, Femap, of coure, show only that element. So basiclly how to input elements IDs to show specific elements.

Thanks in advance!

Grozozo
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Thanks for the answer, i found solution. So basicly, i wanted to enter elements ID by hamd, couple of them, and solution is that after entering one element ID in ID field you need to click More and then that element ID is added, then you do the same thing over.

Grozozo.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

S
Abaqus Element set Not defined error
Replies
1
Views
2K
FEA way
FEA way
a126z
  • Locked
  • Question
ABAQUS element stress values
Replies
0
Views
95
a126z
a126z
Ezeaba
  • Locked
  • Question
LINK180 ELEMENT TABLE DEFINITION.
Replies
1
Views
81
MadisonCameron
MadisonCameron
RED14
  • Locked
  • Question
How do I extract the element stiffness matrix from Abaqus?
Replies
3
Views
192
FEA way
FEA way
shubbad
  • Locked
  • Helpful tip
Abaqus-CAE, Shell element
Replies
1
Views
117
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top Bottom