-
1
- #1
BlasMolero
Mechanical
- Aug 12, 2009
- 911
Hello!,
Now is possible to move/project points on meshed curves with 1-D elements using the MESHING TOOLBOX and the mesh will be updated with geometry!:
Also you can do the same moving points of surfaces or solids: if the geometry is meshed with 2-D or 3-D elements the mesh will be updated as well!!:
Enjoy!.
Beste regards,
Blas.
~~~~~~~~~~~~~~~~~~~~~~
Blas Molero Hidalgo
Ingeniero Industrial
Director
IBERISA
48004 BILBAO (SPAIN)
WEB: Blog de FEMAP & NX Nastran:
Now is possible to move/project points on meshed curves with 1-D elements using the MESHING TOOLBOX and the mesh will be updated with geometry!:
Also you can do the same moving points of surfaces or solids: if the geometry is meshed with 2-D or 3-D elements the mesh will be updated as well!!:
Enjoy!.
Beste regards,
Blas.
~~~~~~~~~~~~~~~~~~~~~~
Blas Molero Hidalgo
Ingeniero Industrial
Director
IBERISA
48004 BILBAO (SPAIN)
WEB: Blog de FEMAP & NX Nastran:
