rQuestionEngineering
Mechanical
- Aug 30, 2012
- 200
How can I gain the below experience as turbine mechanic ?
Accountabilities/Responsibilities:
Participate actively in Company HSE programs and contribute freely to the achievement of the Company’s HSE policies and objectives. Through personal commitment and involvement, contribute to the safe and environmentally responsible operations of the Company’s day-to-day operations by complying with all policies and procedures and actively contributing to improvement through hazard and incident reporting and suggesting improvements.
The Lead Rotating Equipment Engineer together with SapuraOMV engineering PMT and EPCIC’s engineering Consultant will be responsible in delivering the Rotating equipment engineering design to the portfolio of SapuraOMV Project(s).
Assuring that project objectives are successfully and timely delivered and that appropriate reviews have been conducted. The work deliverables as minimum include but not limited to the following:
Process Design Calculations design input such as rotating equipment sizing, etc.
Studies Reports design input such as Reliability, Availability and Maintainability (RAM) Study, Material Handling Study, Mechanical Layout, etc.
Equipment Specifications and Data Sheets inter-disciplines design input.
Rotating equipment input to Start-up, Shutdown & Operating Manual.
Vendor Data Review and Incorporation.
Reviewed, acceptance and sign-off of Contractors' and Vendors' Rotating Equipment deliverables.
Management of Rotating equipment deliverables to the overall project quality, schedule, cost and HSSE performance by Contractors/Vendor through all project stages.
Application of relevant Codes, Standards and acceptable industry practices.
Manage Rotating equipment deviations and management of change (MOC).
Interface and support other engineering disciplines.
Active interface management with other teams, including subsurface, drilling, construction, hook-up & commissioning, and operations, and provide technical support as required.
Participate and direct supervision direct involvement from onshore installation, hook-up, pre-commissioning, commissioning up to the offshore facilities start-up.
Departmental: Plan, supervise and manage Rotating engineering team resources & activities including manpower resource planning, objectives setting, performance, reporting, procedures, codes & standards, and hardware & software upkeep.
Project Pre-Development: Participate and involve in preparation of compressor selection and optimization study and Power Generation and Optimization study as well as design input of Mechanical design basis, concept select, feasibility / conceptual engineering, electrical load list, Mechanical layout & scheme, Mechanical handling study, equipment weight & cost estimate, Front End Engineering Design (FEED) of rotating equipment discipline and contributing to MR5 / FDP / OCS packs.
Project Development (Pre-Award): Participate in the preparation of Tender Plan (TP), Invitation to Bid (ITB), Technical Bid Evaluation & Recommendation (TER) and ready for award preparatory works of Rotating Equipment Long Lead Items (LLI) packages and EPCIC Contract.
Project Development (Post Award - LLI): Involve in TCCM, award and kick-off of Rotating Equipment LLI packages. Delivering a safe, reliable and functional rotating equipment with activities encompassing Vendor Data Review (VDR), Vendor Data Incorporation (VDI), site meetings / visits / inspections, ITP, progress monitoring & reporting, expediting, Factory Acceptance Test (FAT), Inspection Release Note (IRN), receiving at yard, system integration / test / pre-commissioning, Site Acceptance Test (SAT), punch-list clearance, final documentation, managing essential spares and first fill, coordinating training for operation, vendor field support, offshore commissioning and support during reliability period.
Project Development (Post Award - EPCIC): Manage Detailed Design Engineering (DDE) Consultant for Rotating equipment activities and deliverables to ensure project quality, schedule and cost objectives are met. Provide engineering support for yard material procurement, construction engineering, testing, pre-commissioning, offshore hook-up, and commissioning.
Accountabilities/Responsibilities:
Participate actively in Company HSE programs and contribute freely to the achievement of the Company’s HSE policies and objectives. Through personal commitment and involvement, contribute to the safe and environmentally responsible operations of the Company’s day-to-day operations by complying with all policies and procedures and actively contributing to improvement through hazard and incident reporting and suggesting improvements.
The Lead Rotating Equipment Engineer together with SapuraOMV engineering PMT and EPCIC’s engineering Consultant will be responsible in delivering the Rotating equipment engineering design to the portfolio of SapuraOMV Project(s).
Assuring that project objectives are successfully and timely delivered and that appropriate reviews have been conducted. The work deliverables as minimum include but not limited to the following:
Process Design Calculations design input such as rotating equipment sizing, etc.
Studies Reports design input such as Reliability, Availability and Maintainability (RAM) Study, Material Handling Study, Mechanical Layout, etc.
Equipment Specifications and Data Sheets inter-disciplines design input.
Rotating equipment input to Start-up, Shutdown & Operating Manual.
Vendor Data Review and Incorporation.
Reviewed, acceptance and sign-off of Contractors' and Vendors' Rotating Equipment deliverables.
Management of Rotating equipment deliverables to the overall project quality, schedule, cost and HSSE performance by Contractors/Vendor through all project stages.
Application of relevant Codes, Standards and acceptable industry practices.
Manage Rotating equipment deviations and management of change (MOC).
Interface and support other engineering disciplines.
Active interface management with other teams, including subsurface, drilling, construction, hook-up & commissioning, and operations, and provide technical support as required.
Participate and direct supervision direct involvement from onshore installation, hook-up, pre-commissioning, commissioning up to the offshore facilities start-up.
Departmental: Plan, supervise and manage Rotating engineering team resources & activities including manpower resource planning, objectives setting, performance, reporting, procedures, codes & standards, and hardware & software upkeep.
Project Pre-Development: Participate and involve in preparation of compressor selection and optimization study and Power Generation and Optimization study as well as design input of Mechanical design basis, concept select, feasibility / conceptual engineering, electrical load list, Mechanical layout & scheme, Mechanical handling study, equipment weight & cost estimate, Front End Engineering Design (FEED) of rotating equipment discipline and contributing to MR5 / FDP / OCS packs.
Project Development (Pre-Award): Participate in the preparation of Tender Plan (TP), Invitation to Bid (ITB), Technical Bid Evaluation & Recommendation (TER) and ready for award preparatory works of Rotating Equipment Long Lead Items (LLI) packages and EPCIC Contract.
Project Development (Post Award - LLI): Involve in TCCM, award and kick-off of Rotating Equipment LLI packages. Delivering a safe, reliable and functional rotating equipment with activities encompassing Vendor Data Review (VDR), Vendor Data Incorporation (VDI), site meetings / visits / inspections, ITP, progress monitoring & reporting, expediting, Factory Acceptance Test (FAT), Inspection Release Note (IRN), receiving at yard, system integration / test / pre-commissioning, Site Acceptance Test (SAT), punch-list clearance, final documentation, managing essential spares and first fill, coordinating training for operation, vendor field support, offshore commissioning and support during reliability period.
Project Development (Post Award - EPCIC): Manage Detailed Design Engineering (DDE) Consultant for Rotating equipment activities and deliverables to ensure project quality, schedule and cost objectives are met. Provide engineering support for yard material procurement, construction engineering, testing, pre-commissioning, offshore hook-up, and commissioning.
