Spline Data: DIN 3960 Inspection Information

BD5_MxExp · Jun 3, 2024

Hello -

I'm looking for help in determining the inspection information for the following spline / gear data.

1) DIN 3960 m=3,5 / z=126 according to datasheet 16.68.1327.

2) DIN 3960 m=4 / z=24 according to datasheet 16.68.1351.

Thank you for any input.

spigor · Jun 4, 2024

Hi
AFAIK, DIN 3960 has some definitions for involute gearing, so it won't be possible to calculate the inspection information based only on that plus module and the number of teeth.
Do the datasheets contain no inspection information?

mfgenggear · Jun 7, 2024

BD5
As explained by Spigor, the provided
DIN is for gears .
Do you have print that you can take screen shot of the gear data only.
Plus I work with American standards.
But may be Spigor can figure it out.

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Spline Data: DIN 3960 Inspection Information

BD5_MxExp

Aerospace

Recommended for you

spigor

Mechanical

mfgenggear

Aerospace

Similar threads

Part and Inventory Search

Sponsor