May 5, 2003 #1 JerryOB Chemical May 5, 2003 1 I've tried epoxy with roughening surfaces but have not had success - after a timer they come apart. Any suggestions? Jerry OB
I've tried epoxy with roughening surfaces but have not had success - after a timer they come apart. Any suggestions? Jerry OB
May 5, 2003 #2 TVP Materials Apr 12, 2002 4,592 I would try a cyanoacrylate adhesive from Loctite. The following link is to their Design Guide for Bonding Plastics: http://www.loctite.com/literature/design_plastic.html Upvote 0 Downvote
I would try a cyanoacrylate adhesive from Loctite. The following link is to their Design Guide for Bonding Plastics: http://www.loctite.com/literature/design_plastic.html
May 20, 2003 #3 patprimmer New member Nov 1, 2002 13,816 Try 3M They make some amazing double sided tapes that give good bond strength to low surface energy plastics like PP, PE and PET. Surface preperation has to be impecable though Regards pat Upvote 0 Downvote
Try 3M They make some amazing double sided tapes that give good bond strength to low surface energy plastics like PP, PE and PET. Surface preperation has to be impecable though Regards pat
