Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASME (mechanical) Code Issues

qaqceng
  • Locked
  • Question
NBIC - Examination for alteration
Replies
1
Views
106
Christine74
Christine74
2cool4school
  • Locked
  • Question
Carbon steel tubes with Aluminum fins 1
Replies
6
Views
139
EdStainless
EdStainless
A_Alrumaidh
  • Locked
  • Question
ANSI/ASME B1.20.1 thread with API 5B
Replies
1
Views
156
jmec87
jmec87
oguzzz
  • Locked
  • Question
SA-20 Tension Tests (Number of Test Coupons)
Replies
0
Views
32
oguzzz
oguzzz
KenHutch
  • Locked
  • Question
Recovering from PWHT Over Heat above Lower Critical Temp on P5A to P4 (1.25%) Chrome Weld
Replies
2
Views
62
KenHutch
KenHutch
smitch
  • Locked
  • Question
Multi-chamber vessel nameplate - code and 'non-code' info
Replies
5
Views
94
SnTMan
SnTMan
QC7
  • Locked
  • Question
Changes to the WPS
Replies
1
Views
37
gtaw
gtaw
RVinothkumar
  • Locked
  • Question
Please explain. What is nominal thi
Replies
3
Views
64
RVinothkumar
RVinothkumar
oguzzz
  • Locked
  • Question
SA-20 Tension Tests (Number of Test Coupons)
Replies
0
Views
27
oguzzz
oguzzz
RVinothkumar
  • Locked
  • Question
Please explain that, if joint has R
Replies
1
Views
48
Gr8blu
Gr8blu
Erkamal
  • Locked
  • Question
UNS G41300 ( IN ASME)
Replies
9
Views
148
jmec87
jmec87
Adil Pervaiz
  • Locked
  • Question
Post forming hear treatment as per UHA-44 for non-pressure parts
Replies
1
Views
78
weldstan
weldstan
AAA89
  • Locked
  • Question
Is S 275 JR suitable to be used as Construction Material for Pressure Vessel with steam as a medium?
Replies
7
Views
194
abangbikerz
abangbikerz
hansenhanh
  • Locked
  • Question
Can SCH160 SS316L piping with a design pressure of 235bar under 65 Deg C condition
Replies
3
Views
40
MJCronin
MJCronin
Dutch-EGR
  • Locked
  • Question
Impact Testing Reduction Figure UCS-66.1 note1
Replies
2
Views
171
SnTMan
SnTMan
MUHAMMAD FAHAD RANA
  • Locked
  • Question
Wrong Filler Wire used
Replies
2
Views
71
DekDee
DekDee
insider79
  • Locked
  • Question
SS 321H- minimum heat treatment temp 1095 deg C.
Replies
3
Views
73
weldstan
weldstan
WS Choi
  • Locked
  • Question
ASME BPVC Sec.IX-Table QW-461.9, Interpretation
Replies
1
Views
160
david339933
david339933
fem.fan
  • Locked
  • Question
ASME XIII Section 2 DBA: Mesh convergence for Plastic strains
Replies
16
Views
195
TGS4
TGS4
abangbikerz
  • Locked
  • Question
Opening as per Appendix 1-7 1
Replies
3
Views
137
abangbikerz
abangbikerz
You must log in or register to post here.

Part and Inventory Search

Sponsor

Back
Top Bottom