Do you bay any chance remember the maker and model of the printers?
Can you tell if there were limitations regarding the material type, meaning the printer accepted only one type of alloy, or 6061 could be used?
Can you elaborate a bit..?
How the cost of 3DP compared to traditional manufacturing?
Did you set-up a printing line at your place or used 3rd party suppliers?
How did you manage to keep the critical geometric and dimensional features (e.g. flatness, parallelism, tight tolerances etc.), the...
Hi all,
As the title suggests, I'm exploring the feasibility of manufacturing advanced prototypes (pre-production, for "ground" testing purposes only) of aerospace industry components using 3D printing technology.
The company I work for produces aerospace components (R&D, reverse engineering...
Hi all,
Just to clarify that at the moment I'm just exploring the options in general, to see if there is any viability in this at all.
At my workplace there is a need to weld thin pieces of sheet metal (0.2-0.5mm thickness; CRES 321, CRES 347) along a non-linear weld-path.
At the moment the...
Hi all,
It might be staring right at me and I just don't see it, but..
Is there a way to add tapped holes for UNC STI (for inserts) using the hole-wizard?
The idea is to get the "automation" when dimensioning the feature during the creation of a technical drawing, so all the info about the hole...
Hi all,
Looking for a solenoid with the following general characteristics:
Electrical actuation
Compact size - general dim. ~80x80x80mm
High Temp - ambient operating temp (air) >600 deg. C
Actuation travel - ~1.5mm
Any ideas/leads will be greatly appreciated.
Best,
SD
Regarding the AI, yes but briefly, just to get a sense if this rout has any practical advises, but this wasn't that helpful.
Regarding the communication, the controller can be programed for specific functionality using a dedicated software (EPOS Studio).
But the question is how (if this is...
Hi all,
I have a BLDC motor and a complementary controller/driver, the EPOS4 Compact 50/5.
I've successfully paired the motor with the controller using EPOS Studio, and everything works as it should.
Now to my issue:
I can't find any relevant documents or tutorials on how to use EPOS Studio...
Hi all,
As the title suggests I have an issue with broken External References.
The problem:
Ive been working for a couple of months now on a rather large assembly, using the "Top Down" modeling method, meaning I have a lot of external references between sub assemblies and individual parts, and...
Thanks for the tips but ordering a sample isn't a possibility.
Thanks for the info, with the greases that basically what I did, matched the specs to another brand's grease.
Regarding the spindle oil (Yamaha YAC 1013P), I can't seem to find the specs for it and can't figure out if its suitable...
Hi all,
The back story in a nut shell, I need to give some well earned TLC to the Z axis assembly of my 3D resin printer (Phrozen Sonic Mega 8K).
I did a bit of digging and found that the manufacturer of the printer suggests two specific greases specifically for the lead-screw (there are...
Hi All,
I know this is a bit of topic, but I'm need to wire a BLDC controller with Molex CLIK-Mate connectors but the crimper is a bit too expensive for me right now.
Can someone suggest a decent replacement for it?
Thanks,
SD
Thanks for the clarification, but I'm a power-user so I'm familiar with all of what you have mentioned (probably should have used proper terms in my descriptions of the issue).
Although I'm working on a rather complex top-level-assembly (TLA) with all of it's in-context sub-assemblies and...
