Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by HK2013

  1. HK2013

    Trusses at Non Load Bearing "Partition" Walls

    We have had this discussion in our office as well... Following.
  2. HK2013

    Required Concrete Exposure for Boat Ramp

    SlideRuleEra - By our estimate, the cost difference would probably be on the order of 8% of the concrete material cost for the higher strength concrete. We have provided this information and the risks involved to our client along with our recommendation of 4500psi, air-entrained and will see...
  3. HK2013

    Required Concrete Exposure for Boat Ramp

    I was thinking the same thing about the durability. Fresh water, we are planning on a cofferdam during construction.
  4. HK2013

    Required Concrete Exposure for Boat Ramp

    Howdy folks! I was wondering if anyone had any advice on the required concrete properties for a slab on ground boat ramp. The ramp is going to be half submerged and in an area where yearly ice is possible. The way I read Table 19.3.1.1 and 19.3.2.1 in ACI 318-14, since the ramp will be exposed...

Part and Inventory Search