Why would anyone have to move out when shoring for any roof slab when the floor supporting it is open to the skies.
The reason nothing is put yet is because it is not yet certain if the top floor will be used at all and only months later would we know. Of course we don't pay taxes until...
I'm not talking about a 12mm concrete nail but a 3mm concrete nail that will make a 12 mm hole in the concrete and 1 inch deep. How easy is it to make such hole?
If you would use a concrete nail to make a one inch deep 12mm hole in a concrete, how long would it take in your experience (let's say the concrete mix is 4000 psi)?
What strength (in psi) before the concrete nail can no longer be a concrete nail (meaning impregnable)?
And what's make a...
If you would temporary put weak cement-sand in the 0.5 meter open bars, how many bags of sands and cement in your experience so you can easily just remove it a year or two later with just light hammering?
Spray with anti-rust paint?
But would the seismic resistance be better if beams would be added now to the columns or no difference if open ended at the 3rd level? Could adding beams now act like bracing? This is because longspan metal sheet may be used instead of roof slab one year or so from now.
A building was designed for 3 storeys with concrete roof slab. What if the beams and slabs of the roofslab won't be put yet but the 3 meter columns already arise that is open ended (without any beam connections on top of it). Is there any bad effects for this?
Say you have a 3 storey house or storey building and it was built 5 years ago and you wanna add an elevator. What do you guys usually do? Add columns to support it or do you built an isolated box concrete wall to support it or box steel frames? What is usually done in such case?
Can the box core wall system support the elevator itself or does it needs separate columns from the core (or box)? How does human elevator differ to car elevator in terms of structural support? Just need an idea. Thanks a lot.
I mean structure that supports the elevator. For low rise buildings where it is not originally design for elevator and only stairs are present and the building already finished. Is it hard to add an elevator? Can the box core be independent to support the elevator cart? Just want some idea...
Hi, has anyone designed elevator for low-rise such as 3-storey where the weight of the elevator is carried by the main beams and columns and not its own box core?
