LittleInch's latest activity

Negative head red line is not possible. Red dashed is better but you'll have slack line/ unstable flow Blue line is better, but if...

Yup. When you're dealing with unstable flow, unstable things happen. Letting it drain from the bottom is not good, but if Katmar is...

It was the FCC , Federal Communication Commission, who sold the frequencies for Billions of Dollars

You would probably need a 250mm pipe, but not a bad idea.

Well temperature range at the very least. Your "high temperature" might not be mine and vice versa. When you're talking to vendors then...

See this. https://www.eng-tips.com/threads/straight-run-at-suction-of-pumps.393848/ Looks to me to be very vendor dependant, but the...

From what I can see the hydraulic system for the MAX is basically unchanged from the NG. So you really don't want to lose your no 2...

Ok, that makes it clearer. From your OP I thought you were trying to do all this yourself... So is this re gassified LNG? If so it will...

That seems to be the case. There are some cross over elements, but the "power transfer unit" seems toexostfor the LE flaps only. It's...

Here is another compressor project specification to API 11P and an issued for purchase Rev 1 of one of the specs I had previously...

I guess he just thought to move them to a different position than they were to start with.... There are a whole bunch of very similar...

There is probably a way to estimate the time, but the difficulty is knowing if you have a smooth transition between full channel flow...

So a and b are two separate systems which don't inter connect? That's not intuitive. From the excellent b737 site...

No1. From your sketch I don't think this will syphon, but it is not clear where the water level is in the wet well. As long as it is...

Fair enough but you need to answer the question about temperature and why you need clamp on and whether ultrasonic will work in your fluid.