Have a customer that says they've done this before. I've never heard of nitriding 625. Maybe it works, seems like not enough iron content though.
Anyone done it?
I plan on using this load cell placed between the drilling motor and the drill string. It is a multi axis (axial + torque) cell.
http://www.interfaceforce.com/index.php?5600-Axial-Torsion-Load-Cell&mod=product&show=189
I will likely be contacting you soon to get a quote on one of your single...
Peter, we are going to give it our best effort. Keep in mind, this piece of equipment will actually be pretty big. It will have a 15'x15' base with a 22' mast. It will weigh in at around 20 tons. The main use of this machine won't be for exact simulation of drilling, it's more geared toward...
"Parker bought out Miller Fluid Products many years ago. They made teflon coated cylinders. I would ask Parker.
However! Your designed of a solenoid moving a bellows looks good to me since there will be no seal friction and the solenoid can retract to reduce pressure to 0.
You should be able to...
"It is very important to define what is meant by "constant". Constant to what tolerance? I've seen many designs that in theory keep something constant but in reality do not compensate for friction or other factors. Of course, if no one defines the requirements then any design will "work". "...
Peter, do you have a recommendation for a make/model of Hydraulic Cylinder for this application? I'm looking for something with low friction just as you recommended earlier in the thread. I'm trying to eliminate the possibility of any "stick/slip".
Peter, for this project the drill string will be 5 ft max. They want to use the machine for testing out new bits and testing drilling through various materials (concrete, composite plugs, etc). I will be using a 20 hp constant torque electric motor for rotation controlled by a VFD drive. The max...
Peter, I am designing a drilling rig simulator. The client wants to build a machine that will drill different materials at various RPM and force (weight on bit). So, as the machine drills the weight on bit should remain constant. The weight on bit will be adjustable through setpoint on the...
Thank you Peter. Yes, you are correct, I am looking for a servo valve that will be controlled by the process controller. I have found the following one manufactured by Moog...
I have a project that I'm working on that requires a constant force (adjustable) to be applied by a double acting cylinder. Force only need be monitored in the extend direction (0-2500 lb f).
The setup looks very similar to a log splitter, but will have a load cell placed between the cylinder...
I will look into the gas nitriding also. The bearing track is part of a larger part that doesn't need to be nitrided. Is it possible to mask off the part and leave only the track area exposed to the nitriding?
There isn't a specific reason why these parts weren't nitrided to begin with. The...
We also weld Stellite 6 here but I think it would be too brittle for this application. I know there are several types of Stellite. Is there one that would suit this application better?
We have an opportunity to take on a project that requires weld overlay of a part that requires a wear resistant overlay. Basically, the part (4130) has a rectangular track in which a roller bearing rides back and forth (we will overlay the track). I've done a little research, and noticed that...
We've encountered an alarming rate of pinholes in our clad work lately. Trying to nail down the problem. Argon tested good and no leaks. We are welding on 4130 under a WPS that we've used for many years. I'm beginning to think the defects may be caused by the consumable. We are using Arcos brand...
