Hi all,
This application would be using acrylic or epoxy as a structural adhesive.
Here are some joint examples (lifted from http://www.adhesivestoolkit.com/):
In the two examples on the very left, would it be acceptable to first bond the angle(s) to the vertical plate, and then later, when...
Hi, I'm looking for gearbox sump & cover design resources, mostly with respect to fluid dynamics.
To be more specific, here are two still images from a Shell video demonstrating their gear oil in a transparent gearbox.
Static:
Dynamic:
There are several design features that I can see...
Thank you all for your responses! Sketchy design suspicions confirmed.
Excellent. I was under the impression that that's the right way, but given Jehu's popular videos/kits, I was wondering if he might know something that I don't, but clearly the answer is NO.
I'm looking at the design shown in this video:
https://youtu.be/bn0KtdrpoEM
I've drawn a schematic of how I believe it works:
Essentially it's a bunch of circuit boards, with each circuit board having a string of cells in series. The boards are stacked using standoffs, which also serve as...
I'm looking at the concept of "center-point steering" which seems to mean that there is zero mechanical trail and zero scrub radius (steering axis passes through the geometric center of the tire contact patch) or by some definitions, just zero scrub radius (steering axis passes through the...
I definitely second what CapriRacer is saying. If you're a huge OEM you can choose anything from a catalog you want or even get a custom size made for your product. But if you're a small manufacturer with low volumes, you'd best specify something popular if you're able to - it will be less...
To me, this looks like a regular brushed DC motor, not a stepper motor. 12V, 380mA sounds like a reasonable spec for the voltage and current.
14.4mm (0.567") seems like an odd diameter for a motor though. The "usual suspect" with small DC motors is Mabuchi Motor of Japan, however they seem to...
There are also standard stepper motor form factors, such as the NEMA frame sizes:
http://www.piclist.com/techref/io/stepper/nemasizes.htm
That would be the first thing I would determine - whether the size is standard or proprietary.
I did end up getting a copy of that paper, it was a pretty good read, and really did only deal with front engine rear wheel drive (or at least only considered cars with double wishbones up front and a live rear.)
I think it clicked now, is P2ss analogous/synonymous with Q-factor? With the...
Got it, I was reading roll by lateral acceleration and was thinking it was some ratio of the two, but yes, peak vs. steady state of the transfer function of lateral acceleration to roll. Makes sense.
...though it's interesting that the Japanese cars have the lower damping and the Europeans are...
That makes sense, as a few tire manufacturers offer calculations for determining the required tire load index, and all of them just boil down to the static weight on the tire.
I'm going to take a look at that paper. And the whole applicability to front engine / rear wheel drive makes sense, as...
I haven't come across "tire reserve" before but it does make a lot of sense. When you're talking about these percentages, what do you take as the rated and usage loads? My assumption would be that the rated load is the value indicated by the load index letter on the tire, and that the usage load...
From here:
http://www.optimumg.com/docs/Springs%26Dampers_Tech_Tip_2.pdf
Though, it seems like my original question might be answered here:
http://performancetrends.com/text-files/CTA%20Suspension%20Report.txt
The "magic number" seems to be used in a few weight transfer worksheets:
optimumG...
I've come across this rule of thumb in a few places that the total lateral load transfer distribution (TLLTD) with respect to the front axle should be around 5% greater than the static weight distribution with respect to the front axle. What's unclear to me is if this percentage is multiplied in...
The first thing that came to mind here is the idea of disk loading:
https://en.wikipedia.org/wiki/Disk_loading
In particular, the relationship between disk loading and efficiency:
Most light-to-medium lift helicopters operate at less than 10 lbs per square foot, yielding an efficiency of...
