Recent content by nithink

Check whether you have Catia translator license in NX , if available you can directly open the Cat product or Cat part [Drawings won't open even with license] If not use STEP conversion in Catia and then open in NX. Nx 7.5.5.4 Teamcenter 8

Copy parameters - Paste special - Result with link Nx 7.5.5.4 Teamcenter 8

NX can open Catia models directly.[unparametric :)] Nx 7.5.5.4 Teamcenter 8

We also use many custom tools made by a supplier fro us. The 'Machine' we build is big and have option to use many standard tools, so requires clearance checks during design stage. Nx 7.5.5.4 Teamcenter 8

btrueblood,how much variation? Nx 7.5.5.4 Teamcenter 8

John, any idea or detail regarding Snap on Wireframe program? Link Nx 7.5.5.4 Teamcenter 8

You will find the command in Customize-selection bar - find navigator. Nx 7.5.5.4 Teamcenter 8

Find in navigator will locate a part in assembly navigator when you clicked a part [Not sure whether this is what you wanted] Nx 7.5.5.4 Teamcenter 8

Reposting this thread here in NX forum based John's suggestion. We are planning to create a CAD database of standard tools[Wrenches,sockets, adapters etc.]. Have couple of questions. Is ASME B107 stanadad followed by all the tool suppliers like Snap on,Norbar etc? Can we get the External...

John, thanks a lot for the files we can use them as template.This is the precise thing what we intended to do [Part family].I will re post this thread in NX forum as you mentioned. We use lot of tools from Snap-on. MikeHalloran,making wrenches oversize in CAD is bit tricky as managers here...

We are planning to create a CAD database of standard tools[Wrenches,sockets, adapters etc.]. Have couple of questions. Is ASME B107 stanadad followed by all the tool suppliers like Snap on,Norbar etc? Can we get the External dimensions [such as OD of handle] for Impact wrenches,torque...

I have seen CHMAFER written on drwaing as prefix though,not sure whthere this is in standard or not. 1x45 CHAMFER Nx 7.5.5.4 Teamcenter 8

Even NX have prefix C. But i never used that for chamfer we use 1 x 45 for 45 degree angle for rest its 1x2 or direct diemnsioning. Nx 7.5.5.4 Teamcenter 8

John..do you have the assembly file :) Nx 7.5.5.4 Teamcenter 8

Move Sketch into a Layer. Nx 7.5.5.4 Teamcenter 8