Recent content by redlee

So if the motor starts on a battery is the motor ok or could it still be bad ? Thanks for the help.

No other wires its all contained once assembled. Only wires coming out are the A1-A2 and the 110 black and white.

Just checked the Potentiometer, reads 407 Ohms to 0 Ohms seems to be working. But it doesnt change the DC voltage at the A1-A2

Its the controller that it came with, I checked the voltage at where its marked A1-A2 beside the L1-L2.

I have this DC motor, can anyone tell me how to see if its good, I hooked it up to a 9V battery works both directions. I hook it up to the controller and it wont start without a bump. Controller is reading 65V on each leg. Dont know if thats correct or should it be reading 120V on each leg. Thanks

Sorry it took so long but yes it worked, it was for my brother and he reported all good Thanks again.

Thanks all !

Any idea about OD size ? Thanks

Hope this is better.https://files.engineering.com/getfile.aspx?folder=34b0e0e1-9f63-418c-8a46-0b014f7090f2&file=gear1.jpg

Hope this is better.https://files.engineering.com/getfile.aspx?folder=ef8aef41-5f5d-44d9-977e-9884ee97a9a5&file=gear.jpg

Hope this is better.https://files.engineering.com/getfile.aspx?folder=35f30986-f127-4f93-852d-5ac65741dce2&file=gear2.jpg

6 NDP 14.5 PA No8 12T-13T 7DP-1-#5 #6 - 8 DP 14.5 PA I can read the pics fine, I could try and repost ? Thanks

Thanks

Im trying to make a hand crank, what I need is 2 identical gears with a 2.25 center distance. Speed is slow number of teeth doesnt matter, Ive been trying to decipher the gear info in Machinery handbook and online and my old brain isnt working. I have 3 gear cutters , just wondering if someone...

What I need is OD size and number of teeth . Thanks