Recent content by Sa-Ro

Thank you.

We are using the same standard for reference. Only confusion is "B10 - EXPECTED TIME AT WHICH 10% OF THE POPULATION IS PREDICTED TO FAIL" means scenario A (or) B. Thank you.

Hi Happy new year! It is for my understanding only. My colleague statement is scenario B. My point is scenario A. We are dealing with pneumatic products where life of a product specified in terms of distance / cycles. We are already practicing reliability and determining B10 life for our...

Shall consider, Scenario A is true.

Thank you Redsnake. Can you provide some reference / standard / website as a evidence. So that I can refer.

Hi What is mean by B10 life. For example, B10 life is 1000 hours calculated from physical validation of part. Scenario A: Which means 10% of population may fail BEFORE 1000 hours. In a population of 100 parts, 10 parts may fail BEFORE 1000 hours. 10 parts failure may be at. 100, 200, 300...

Burunduk Thank you. ___________ Drawoh I have a female part of same size with a projected shaft which pass through the hole.. Thank you

Hi How to locate a hole - offset from center plane. Refer drawing. Which one is correct - Method A / Method B Thank you.

Thank you

Thank you

Ignore the previously attached drawing.https://files.engineering.com/getfile.aspx?folder=cd6a6f0e-6825-497d-bddb-b14c8c1afeff&file=Drawing_1.PDF

I am using ASME Y14.5:2018 standard. I have seen examples for CF as below. Is it possible to use CF as below? As per ASME Y14.5:2018, para 3.10 and 3.11 CF defined as "two or more interrupted features". Till date I thought of interrupted by material removal. My bores are different in size...

Can you provide any reference standards for this? Thank you for the suggestion. In whats app messaging application software, if we mentioned @ symbol the list of contacts will be displayed and the concerned person will be notified separately. Here I would like to mention that the reply is to...

@Burunduk Thank you @CheckerHater Small hole will be positioned wrt to datum A. @ 3DDave Small hole will be positioned wrt to datum A. @ jassco Yes. It is a solenoid body. Can you explain the A1 and A2 concept. @ Belanger Do you mean to provide datum B for opposite (to dia 28) bore and use...

Hi I need to control the outer surface of the rectangle wrt bore as shown in image. Requirement: Outer surfaces to be equally located from bore center. Does the drawing representation right? Thank...