Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  • Users: WK95
  • Order by date
  1. WK95

    Good Practice in Keeping Links?

    I've read elsewhere that it's generally not a good idea to create any external references (part to other part references) to anything that isn't published. So in CATIA's Part Infrastructure Settings, should I keep enabled the "Keep Link with selected object" and "Restrict External selection...
  2. WK95

    UAV Belly Landing Loads?

    Hmm. That's an interesting way to look at things. Thanks for the suggestion.
  3. WK95

    UAV Belly Landing Loads?

    Well, I've only heard of the term belly landing being used in reference to fixed wing aircraft. But yes, it is fixed wing as are the Stalker and Spu'Rangers. Let's say the landing is on dirt (soft at it's best and packed at it's worst). For the Spy'Ranger , referring to time 1:07 in the video...
  4. WK95

    UAV Belly Landing Loads?

    I'm a student working on designing a UAV and I'm currently working on figuring out preliminary estimates for most structural loads. I'm looking for reference for the load factors experienced by UAVs designed to belly land. Examples of UAVs that belly land are the Lockheed Martin Stalker, and...
  5. WK95

    Best Practice for Publishing Elements

    In a given CATIA assembly, I have my master geometry in a part. 1) When publishing sketches, lines, and edges for other parts to use, should I publish into the master geometry part level or publish to the assembly level?
  6. WK95

    Deflection of simply supported plate with multiple points of application

    Who is this MW? I'd like to learn more of his evil genius tricks.
  7. WK95

    Deflection of simply supported plate with multiple points of application

    How can I estimate the deflection at the center of a simply support plate (and a sandwich one) with multiple points but same intensity of load application? The points of application are symmetrical and form the shape of a rectangle and the loading at each point is the same. An approximation by...
  8. WK95

    Merging lines in fillet?

    Shown above is the fillet of two surfaces. There's a small surface in between the two curves designated by the red arrows. How can I remove that small surface by merging the two curves?
  9. WK95

    Modeling smoothly blended fuselage and vertical tail

    The only sections that I nee4d to control most critically are the vertical tail airfoil sections. The image I posted isn't intended to be reflection of an actual aircraft though, I just used ovals for the sections because they were quick to make. And the reason I used the sections and guide...
  10. WK95

    Modeling smoothly blended fuselage and vertical tail

    I want to create an aircraft empennage which is blending in with the vertical tail as illustrated by the following picture. I tried doing something similar but the surface isn't smooth as shown by the attache picture with zebra stripes. What am I doing wrong? Ideally, I want to model an...
  11. WK95

    Composite structure analysis by hand

    Thanks for all the suggestions. Brian, in your upcoming book, think you can include a little section about composite GA structure in which there are little to no stiffeners but rather a sandwich skin to resist compression and buckling? Us homebuilt aviation enthusiasts would greatly appreciate...
  12. WK95

    Composite structure analysis by hand

    I've picked up a copy of Reddy and boy, is it heavy on theory and serious math. Definitely grad school stuff (I'm only in undergrad). Other than that, the CLPT section isn't too hard to wrap my head around. For now, my plan is to start out by developing a small (4" diameter at most), simple...
  13. WK95

    Composite structure analysis by hand

    There are lots of resources for structural analysis using FEA but I don't want to even dabble with FEA until I can confidently get ballpark answers the old fashioned ways (Microsoft excel, pen and paper, calculator, etc). Any resources for that? Here's what I'm looking for 1) Resources for...
  14. WK95

    Focus on unidirection composites in intro texts?

    Thanks for the good info guys.
  15. WK95

    Focus on unidirection composites in intro texts?

    Yes, total beginner question. Why do many introductory or overview texts on composite materials focus primarily on unidirectional fabrics while giving minimal coverage to bidirectional? They focus a lot on undirectional composites and base a lot of the derivations and calculations on the...
  16. WK95

    Joggles with composite structures

    The brown surface is the top skin and is made of a different surface than the bottom skin. I want to make a joggle at the area where the two surfaces meet.
  17. WK95

    Joggles with composite structures

    How do you folks make a joggle with composite materials in CATIA? What I have so far are surfaces defining an airplane wing's leading edge. I've split the surface into two parts, top and bottom. I've set up the layup on the top half already. On the bottom half, that's where I need to create a...
  18. WK95

    Importing airfoil data, making a curve, and manipulating curve?

    Yeah. Now I'm just putting the airfoil coordinates in Excel, scaling everything as needed there, then using a Macro to import the points.
  19. WK95

    Importing airfoil data, making a curve, and manipulating curve?

    Thanks. I've got that working and am using the Translate and Scale tools in the Wireframe workbench. But how do I scale the airfoil to a specific dimension? I want to scale the airfoil up to a specified chord length but the "scale" tool is very imprecise and only allows me to scale based on a...
  20. WK95

    Importing airfoil data, making a curve, and manipulating curve?

    One thing I'm trying to do is to create a new axis system where I want the airfoil tip to start at. However, the macro doesn't recognize or allow me to select another axis system to generate the coordinates from.

Part and Inventory Search

Back
Top