Search results for query: *

So if the motor starts on a battery is the motor ok or could it still be bad ? Thanks for the help.

No other wires its all contained once assembled. Only wires coming out are the A1-A2 and the 110 black and white.

Just checked the Potentiometer, reads 407 Ohms to 0 Ohms seems to be working. But it doesnt change the DC voltage at the A1-A2

Its the controller that it came with, I checked the voltage at where its marked A1-A2 beside the L1-L2.

I have this DC motor, can anyone tell me how to see if its good, I hooked it up to a 9V battery works both directions. I hook it up to the controller and it wont start without a bump. Controller is reading 65V on each leg. Dont know if thats correct or should it be reading 120V on each leg. Thanks

Sorry it took so long but yes it worked, it was for my brother and he reported all good Thanks again.

Thanks all !

Any idea about OD size ? Thanks

Hope this is better.https://files.engineering.com/getfile.aspx?folder=34b0e0e1-9f63-418c-8a46-0b014f7090f2&file=gear1.jpg

Hope this is better.https://files.engineering.com/getfile.aspx?folder=ef8aef41-5f5d-44d9-977e-9884ee97a9a5&file=gear.jpg

Hope this is better.https://files.engineering.com/getfile.aspx?folder=35f30986-f127-4f93-852d-5ac65741dce2&file=gear2.jpg

6 NDP 14.5 PA No8 12T-13T 7DP-1-#5 #6 - 8 DP 14.5 PA I can read the pics fine, I could try and repost ? Thanks

Thanks

Im trying to make a hand crank, what I need is 2 identical gears with a 2.25 center distance. Speed is slow number of teeth doesnt matter, Ive been trying to decipher the gear info in Machinery handbook and online and my old brain isnt working. I have 3 gear cutters , just wondering if someone...

What I need is OD size and number of teeth . Thanks

What Im trying to make is 2 identical gears with 2.25 center distance, number of teeth doesnt matter, speed is slow for a hand crank. I have 3 gear cutters marked as such. Thanks https://files.engineering.com/getfile.aspx?folder=c86b71c0-9f7c-41f4-b5a9-8677977c9348&file=gears.jpg

I havent posted here in years, but I have a question about gear blank sizing in relation to center distance . Can I post it here ? Thanks

...600 watts x 3 = 1800 watts to start. Some motor name plates will show starting watts higher in some case 9 times higher, check the name plate. ******** ******** Approximate Starting Watts * Motor HP Rating Approximate Running Watts Universal Motors (small appliances)...

Ok got Hz set at 3700 rpm, but still won't start my saw? It will spin the blade -starter switch makes some clicking noise but won't contact or start the motor. I don't want to fry something so I just hold it for a few seconds and have not tried since.

I tried running my Tablesaw of it , 220single phase 3 hp 14.4 amp would not start it, it would turn the blade but no go. Should a 6500 gen be able to start that kind of a load.