Search results for query: *

dvd here's the picture I might have not mentioned this before - Motor is coupled with Gear Reducer which is connected to Head Pulley shaft by chain drive

dvd I already contacted a transmission component rep and he was of no help. He still owes me some info so lets see what he comes back with. The issue here is, the conveyor has chain drive, Gear Box & Motor (all specs are mentioned in previous threads) which is a pain maintenence wise. SO I am...

Is there a some way to calculate sprocket PCD & # of tooth?

Correct, wanted to double check if that's it is

3DDave In your calculations what is 96 feet? Is this conveyor lift / height of Drive pulley from ground? How did you come up with 106 HP?

All, thanks for active participation. After digging through some archives and asking around, I have following information: Chain – 22 ft. 200-2 Cottered Chain Drive Sprocket – D200B17H x 5.1181 {130mm} (17 teeth) Driven Sprocket – D200M60 (60 Teeth) Also the GB ratio is slightly...

I'm trying to design chain & sprockets for a chain drive powering a belt conveyor. Things known to me: Drive Pulley Dia– 36" Motor – 150 HP 1780 RPM Gearbox – M1170DH2-A-11.090:1 Ratio Falk Backstop - TA30 Morse Snubber Pulley Dia - 18" Conveyor Rise – 16 Degrees Conveyor Length –...

Celt83 Thank you very much for the explanations and suggestions. Will definatly try those out over.

WinelandV, In this situation, according to you what kind of boundary conditions would be there? My background has been entirely mechanical engineering and 10-4 on the mentor part. Next week I have scheduled something with someone who uses RISA on day-to-day basis. I did go through some basic...

WinelandV, DaveAtkins & jayrod12 There's no supports underneath the platform. The left side of the platform beyond the yellow centerline in image2 is on the ground and the right side is suspended in air. The 2 pins shown in RISA model I have no clue why they were put in by the previous person...

I did, but all I got was that they don't do individual projects like this.

I am new to RISA and taking over a project from a guy who left the company. This project has a platform with grating all around except at one end (See image2). Currently, in the opening on right side of ACAD image, there's a crane suspended pump and to counter it on left side there's 2 5 ton...