Search results for query: *

Here the attachemnthttps://files.engineering.com/getfile.aspx?folder=e60cade6-7037-46be-ac00-f84548e53b42&file=Kinmatic_Coupling.JPG

No, in this case, I took the Coupling + Connector from Part 1 to Part 2, in order to simulation the rotation like a hinge. I didn't have the geometrie that why I took a Kinematic Coupling with Connector. I put a picture I try to explain it with a picture as attachment!

Hello, I have the following structure: Kinematic Coupling - Connector with 0 lenght (Cartesian, Rotation) - CBar. I need to see the Force at this point and Resquest: *OUTPUT, HISTORY, FREQUENCY = 1 *NODE OUTPUT, NSET = H_LS RF, RT, TF, U, But I get nothing! I didn't see / read that there...

Oh. Ok. I miss this, sorry. Thanks you for your help.

No. If I just want to have the OUTPUT from the last Step ? This is not possible ?

Here: With this, I get the 42GB odb. *STEP, INC = 1000, NAME = Pre-Tension Disp, NLGEOM = YES *STATIC 0.1 ,1.0 , , *BOUNDARY, OP=MOD PRE_TENSION_NODES,1, ,0.5 ** ** STEP 1 ** BOUNDARY **CONTACT CONTROLS **Anonymous Contact Control *CONTACT...

I know. But there are the same. Only OUTPUT Request is not on the same place and I add ELSET= BKRT :-(

At the start it was 7GB and as I put the Field output at the end for only my set 42GB! :-(

Doesn't help and my SET it's not really big. So I make it with FLIED.

I only have this Resquest at the end of my last step: *OUTPUT, HISTORY, FREQUENCY = 999 *ELEMENT OUTPUT, ELSET = BRKT

Hi, I put the Frequency by 999 in order to have the last increment because I just want to see the last increment. There is max 17 inc pro step. And I only want to see the last step. Also Last Increment from the last step for an ELSET.

Hello, I have a big Model and I want to have the Stress Results only for some parts. So I create an Element Set. And I write this: *OUTPUT, FIELD, FREQUENCY = 999 *ELEMENT OUTPUT, ELSET = BRKT But I get a huge odb. Bigger that I use to have with the all Model. So I change it to History...

Hello, Thanks you for this chat. When we are starting with AM simulation it's a big help. SO if I unterstand right: For MaterialDeposition: Create an *EVENT SERIES, NAME = "MaterialPath" , TIME =TOTAL TIME, TYPE = "ABQ_AM.MaterialDeposition" : With the value of the path T, x,y,z, Power After...