Hello Metalart,
I measured the pitch by counting the number of threads per inch. So there were 20 threads per inch, but, they were 4 starts. So it meant, it had only 5 threads per inch from one start. Hope this makes sense. I wonder why you would say that it would be a 1/4-80, 4 start.
Hope...
Thanks a lot group for your valuable insights. I'am surely enlightened regarding the multi start threads.
It sure is a strange thread, but as Screwman said, there are even more wierd ones in the market!
Thanks again group,
adios
Sandy
I'am sorry diamondjim, I really did'nt follow your question. I don't want to show the excess partial thread. Just want to know the standard representation of a four start thread on both male and a female part drawing.
And my second question is (I'am repeating this!) if this part is to be...
Hello Group,,
Can I get any help from this group for the above issues? I'am badly stuck up with my design coz of this. Appreciate any response on this.
Thanks,
Sandy
Hello Everyone,
I have couple of questions on a four start thread. I have a bolt and a female four start threaded part which has to be represented in drawings. I was just wondering whether there is any standard for representing a four start thread on both male and the female part. It is a 1/4"...
Hello Group,
I found the solution, it was a basic thing, and probably one of the most important thing to worry about in assembly.
It was so simple as setting my computer time to an earlier time (i don't know how it happened!). It was set a month ago, sometime in August. And the model and...
When I tried loading components, its just hanging the system. I tired with Load Reference Documents OFF. Its just not alowing me to load any of the parts, does this mean all the parts are corrupt? keeps giving me Incident error. Except for 2 parts which did load, which were cleaned by CATDUAV5...
Thanks for your replies Akesson and Catiajim.
Coming to the suggestion by Akesson, both the below mentioned options were already activated
Options-> General->Document->Folder of the pointing document
Options-> General->Document->Relative folder
So it did'nt help much. Regd. your other...
Hello Group,
I found a way to open the file, by changing the Options-> General->Document->Other folder and specifying the folders which had all the sub and main assemblies. But just can't see the assembly in the catia window, I can see the tree will all the parts, constraints and assembly...
Hello Group!
I am having a major problem with my assemblies. I have an assembly with around 10 sub assemblies saved in different folders. I've constrained the parts in 'n' number of ways. The main assembly was all working fine until I had to delete an unrelated part saved in one of the sub...
Hello Everyone,
I had a question whether Catia has any add-ins or macro's which will enable standard, gear, sprocket, screw, bolts, nuts,etc. designs. Like some of the standard components used in Mechanical design. If someone has used CADKEY, they might know of DRAFT-PAK. I' am checking for...
Hello all,
Thanks a lot for all your advice, i had a question for thruthefence's suggestion , I had a chance to check out the Cessna 500 trim actuator system. And it really works perfect for our application. But is there any place I can get more details on their system, like vednors, specs for...
Hello,
I am trying to design an irreversible actuator system for trim assembly in small jets. I'am having problems with the present ACME threads, for linear motion. So we are designing it with a thread system with 4 leads. When I say 4 leads, its got 4 different threads starting on the same...
Hello,
I am trying to design an irreversible actuator system for trim assembly in small jets. I'am having problems with the present ACME threads, for linear motion. So we are designing it with a thread system with 4 leads. When I say 4 leads, its got 4 different threads starting on the same...
I tried creating a product and tried inserting an existing object in *.x_t file format. But it gave me an error saying "Insert failed due to invalid and inconsistent extension type"
Is there a solution for this??
Thanks,
I have the correct multi-CAx pulg-in. I am able to open all the *.iges, *.stp, *.stl..etc...except for the *.x_t format files. Is there any converters that I can use to convert it to some other format that is readable in Catia?
Thanks,
Hi there,
I would like to know whether, there is any way I could get the 2D moment of inertia values of a section view in drafting module.
Also like to know, if I could get the 2D moment of inertia values from a split assembly (MI for whole assembly), I was able to get MI values for individual...