Search results for query: *

I am using NX 11 and have been having an issue with some older part files. We are using an attribute template and with certain older files, some of the attributes cause issues and prevent the file from being saved. I have determined that all of the attributes that cause this problem can all be...

That did the trick, thanks a lot!

Yes, here is the older template: http://files.engineering.com/getfile.aspx?folder=9b64461b-5e7f-435e-b337-5c70606bdb10&file=STANLEY_METRIC_metric.prt And here is the newer template...

Thank you for the responses. That thread is one I came across prior to posting this question and it doesn't quite address the issue I am running into. Also, thank you again PhoeNX for your post about creating the template, that has helped. I do have the template sorted already and have double...

So I've read through current posts and don't see anything that addresses the issue I've ran into. I currently have 2 different Parts List templates to use, one was created and shown to me when I was hired, the other I made myself. So far as I can tell, the only difference between the two...

Thank you @PhoeNX that solved the problem!

Thank you for your response nutace, but I believe you have leader arrow confused with the stub. "No stub" means that the arrow from the balloon goes directly to the part, while "with stub" means there is first a small horizontal component from the balloon before the arrow goes directly to the...

Thanks for the tip, I did try to search with a list of different key words, and I still cannot find any settings that seem to effect the auto balloon function.

Hello, I have run into an error of inconvenience and haven't found out why or how to fix it in my searches. I currently have my drafting standards for parts list set to "no stub" on the callouts. When I place these callouts manually, the settings are fine and they are created with no stubs...

I turned off "leaves only," and set the attribute to P_LIST_IGNORE_MEMBER and the parts list ignores that member and it's sub-assembly items. Leaving these same attributes, if I turn back on "leaves only," then it displays the sub-assembly items and doesn't ignore them. I think I did find a way...

So I've applied P_LIST_IGNORE_MEMBER to each sub item of the assemblies that I don't want the leaves to show, and the parts list is still ignoring the parent item as well. I've tried both attributes on individually, and at the same time. It seems that when I have the parts list set to do...

Thanks for the response. I've read up on those attributes prior to posting. The difference between what I am trying to do and what those attributes supply is this: P_LIST_IGNORE_MEMBER ignores the immediate member, but not the components that are used to create the member (sub-assembly...

I am using NX 9 and am trying to customize my parts list a bit. I see the options to show single level, and to show leaves only, but is there some intermediate where I can choose which parts to show single level and other parts to show leaves only? This would be helpful because some of our sub...