When looking at a flow gain graph flow vs input voltage. If pressure can vary the gradient of the plot i.e higher pressure equals sharper increase in flow. What can vary the curve at the top of the plot when the flow reaches its rated flow. Is this the spool charictaristics and/or the drive...
I see they didnt test the Dell M90!, well I can't see it in the 'certified' list. SW2009 works great on mine no problems at all.
A Ledson.CSWP (when it was hard!)
Ive drawn a quick diagram of what Im doing, any help would be great.
A Ledson.CSWP (when it was hard!)http://files.engineering.com/getfile.aspx?folder=1d858709-47ac-44a7-b1cb-f133ae10fde7&file=draw1.jpg
Hi I want to carryout an inspection of input voltage vs flow rate properties of a hydraulic servo valve Im impressing a triangular wave (frequency 0.01Hz amplitude +-10v) and plotting voltage and flow on an X Y graph. I have to set the main pressure so that the valve pressure fall at the flow...
Hi, Im using ACAD 2008, is there a quick and easy way of creating first or third angle projections of my 3d solid model so I can dimension them up in paper space. I know I can use viewports to create the views but they all seem to be displayed in different scales so I then have to individually...
I cant remeber if Ive done this before, but can someone please remind me is there a way to display the mass properties in a drawing as a table and also the c of g orgin as per the model display.Many thanks for any help.
A Ledson.CSWP (when it was hard!)
I have 4 identical parts that need to be mated in different locations with identical mates is there a quick way of copying the mates and applying them to the separate locations ie 4 blocks into 4 box section ends.
Im using ACAD2008 and tring to model in it. Im a Solidworks user primarily, and Iam tring to help a collegue out with a problem he has. We design hydraulic manifolds with lots of internal cavities which is easy in Solidworks due to the design tree which enables you to switch on and off features...
b]bold[/b]I want to use a block as a mold tool to make cavities etc. Im having trouble, do I insert the block into the drawing, position it and then subtract block from model?? any help would be great.