Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. 77mccoy

    Relief valve sizing

    what is the proper way to size a relief for a home hot water heater 50 gallon gas 150000 to 180000 btu/hr input. Need a #/hr calculation with a set pressure of 75 psig
  2. 77mccoy

    piping connected to pig receivers

    Loosen up your anchors change your default from 7,000,000 lbs a inche to 100,00 watsch what happens
  3. 77mccoy

    Translational Stiffness Estimates for Expansion Joints

    Normally input some resistance say 1000 lbs per inch for XYZ forces then put some rotational forces. Play with numbers and it will give you a feel for your model. Be sure to anchor your system to make piping move in direstion to take advantage of expansion joint
  4. 77mccoy

    Compressor Station Blowdown Silencer Inlet Press.

    We have a compressor station with 70,000 SCF in station piping. There is a Discharge (575) header with 6" blowdown valve and a suction header (300) with 6" blowdown valve. During ESD both blowdown valves open. The 575 will enter the vent pipe first to the silencer. Downstream of the blowdown...

Part and Inventory Search

Back
Top