I have a model where a 3 storey building sits on top of a slope. the pressure applied by the building is 30kN/m2. i am informed that we have to use a pressure line to modal this pressure. my question is, how long does the pressure line has to be,how long does the distance between the pressure...
I am trying to find as much information about calcium carbonate which forms around the inner surface of the down-hole tubes in oil wells. i hav chosen limestone because there is more information available about limestone in books and internet. but i need to have more information, such as stress...
I have been trying to model a calcium carbonate model.i wanna ask whether it would be ok to use CONCRETE meterial model to model the calcium carbonate(scales)on a steel pipes inner wall. i want to know at which pressure the scales start to get crushed or removed. does anyone know how i can get...
hi again.. thanks for replying to me. im doin some work on a quarter of a steel cylinder with calcium carbonate precipitate formed on the inner wall of the steel cylinder. i need to apply a 200micrometer diameter water spray on the precipitates, at about 10MPa. i have been able to modelt eh...
hi again.. thanks for replying to me. im doin some work on a quarter of a steel cylinder with calcium carbonate precipitate formed on the inner wall of the steel cylinder. i need to apply a 200micrometer diameter water spray on the precipitates, at about 10MPa. i have been able to modelt eh...
i have been trying to model a cylinder using 2D modeling in ANSYS. The lenght of the cylinder is about 20mm, while the inner diameter is about 90mm. There is another compound inside this cylinder which is a compound like Barium sulphate or brine.
i have been able to do a 2D model of it, but...
i have been trying to find a formula or any equations which can calculate or any theories which states on finding the stress values and displacements of points on the cylinder wall by point water pressures using nozzle sprays.
the water pressure is about 20MPa n the cylinder is about 5mm thick...
