Well I was half right ! Here goes. I started with a cylinder, I chose a end and inserted a circle on the face that was the same dia as the circle,It can be bigger. I then closed the sketch and hightlighted the circle. I chose insert/curves/helix and filled in the blanks. Watch the satrting...
I had to put a groove for cable on a winch drum and if I remember correctly all that I needed to do was sweep a profile about an axes. I started with a cylinder, put the profile on a perpindicular plane to the cycinder axes, clicked the helix button, filled in the blanks, bingo there it was. I...
Chris--
You hit the nail on the head !! I must have had the same instructor !! The truth of the matter is, there are always work arounds, but why should you or I or anyone of us have to work around something as simple as this. When I first started working on CAD that was a way of life. That was...
Thanks for the reply
How do your folks explain the examples used throughout the ANSI Y14.5-1984 hand book ? I have lost more than a few battles with checkers over this. In fact I have faxed pages from the hand book to the local SW tech for forwarding to SW. The tech, in fact has logged the request.
HAS ANYONE FOUND THAT WHEN YOU NEED TO INCLUDE USER TEXT WITH A BASIC DIMENSION (BOX AROUND THE DIMENSION) THAT YOU CAN NOT HAVE THE USER TEXT INSIDE THE BOX ?
THANKS IN ADVANCE
Snare1
I'm running SP0.0 I'll check with tech support to see if they can shead any light on the SP issue. I did however find that if the hole was created using the hole wizard and you use smart fasteners the flat hds will orient themselves correctly.
Thanks for the reply
Hello all!
Sorry for the missing greeting on my first thread.
OK here goes, when using the hardware from the toolbox you normally drag the selected piece to the hole or feature where you want it to go, right? well, has anyone been able to do that with flat head screws? I find that they will go...
How can you add tolerances to countersink dia. i.e.
if you dim the drilled/punched hole and within the same call out you add the countersink dia and it's tolerance?
