Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. jeckle

    Medical v. Aerospace

    Well I think thats pretty accurate for the most part, except they don't necessarily have MD's. But non technical people seem to have an undue amount of influence / power. We basically get direction from marketing. When I was in aerospace it was the engineers who ran the show period. The...
  2. jeckle

    Medical v. Aerospace

    Does anyone have any experience in switching from one to the other? I recently changed from Aero to Medical, and am now having second thoughts.
  3. jeckle

    Drawing Revision and Rev Symbols

    Medical device, came from aerospace.
  4. jeckle

    Drawing Revision and Rev Symbols

    macduff and all; Thanks for the input. It's really not worth the effort to do it manually, especially considering it wouldn't be appreciated in my current industry.
  5. jeckle

    Drawing Revision and Rev Symbols

    It doesn't take up any additional room when done properly. The method I'm trying to describe is standard in aerospace. Thanks
  6. jeckle

    Drawing Revision and Rev Symbols

    When revising a drawing with several changes under the same revision I would like to individualy nuber each change in the description section of the rev block. It would look something like this Rev | Description -------------------- | 1. xxxxx B | 2. xxxxx | 3. xxxxx...
  7. jeckle

    Melt Practice AMS 5504

    OK thanks for the info. Do you know of a spec for coiled or strip 410 with remelt or inclusion limits. Thanks again
  8. jeckle

    Categorizing Low and High Cycle Fatigue in Turbine Engines

    HCF usually > 10^7 or 10^6 cycles think vibrations rotations ect. Designed to Goodman Diagram stresses less than endurance limit LCF usually < 10^6 cycles think about cyclic loading like the pressure cycle of a planes cabin. Designed to an LCF curve component life based on stress and cycles.
  9. jeckle

    Melt Practice AMS 5504

    Can anyone tell me if melt practice is specified in AMS 5504. Or more specifically, if there are Non Metallic Inclusion limits. Thanks

Part and Inventory Search

Back
Top