Whose diesel? Most of the industrial's will handle 27 to 34 HP to the side, your 6.6 Pd is = to a 7" OD, JUST FOR SIMPLICTY 'S SAKE. A 7” B grove will pull 11hp with a tight belt, We always push the 5V since it will pull 16HP hand tight. Which reduces the side load on the engine.
SBI...
Turbo's still require crank power!, the exhaust gas is pushed out of the cylinder by the piston, which is connected top the crank, this is where the pressure comes from. it just doe's it more efficiently.
Diesels work fine in cars, it is the driver that wants to leave every stop sign like a...
I have a lathe from the early 40s,and one from 52, they are from two co. one has 12 no. the other is 10, the rule is
Odd number of thresds, you can lock in on any number, Even number only use the even numbers, 2,4,6 ect, has worked well for me for the last 35+ yrs.
SBI
Central Ne.,USA
two places you can look for your help are
afsinc.org = american foundry society inc, in Chicago
nffs.org/main = non-ferius foundry sociaty
and for the closest foundry to you try this neat website from the afs = http://www.toolingnet.org/AFS/ this is a casting source directory.
There aer...
I have been in the Aluminum & brass foundry business for over 35 years, before you think you want to start one, you need to check with your states dept.(version of the EPA), you will need a permit to operate a foundry, partly due to the fact we vent smoke!, When we set up our current foundry...
# NOTE there is a small group of family owned no-ferius foundrys left in the USA (we are one) and we do pour 713, 35/27/5
74 br, It will air cure in 21 to 30 days from pour date.
for small runs to short production it works well and machine very well
SBI
Central Ne.,USA
We have a OEM that is using the Chrysler 42LE auto in a utility app. and we need to reconfirm the proper placement of the converter inside the bell housing, we are looking for the true distance from the flex plate mating surface on the converter to the front of the bell housing in mm or inches...
if you are lucky enough to live in a small city, sat under 50K , go make freinds with the local scrap yard, by offering to pay a bit above market value, they might save old lawn tractors brought in for you to look at & buy
SBI
Central Ne.,USA
areo ? from industrial engines and casting I was taught that a flat washer has two sides, if you look at it you will note on hte out side , one edge is sharp and square teh other is rounded.
the rounded go toward the work peice the sharp square gos to the bolt head, lock washer or nut. this...
I am looking for a source for dimensions, cad prints, pdf, any source,for bolt pattern on the back of the Dodge,Chrysler 3.5 liter V6? I have a OEM that wants to use the 42LH transaxel in a off road utillity vehical,
SBI
Central Ne.,USA
SBI
Central Ne.,USA
I am looking for a source for dimensions, cad prints, pdf, any source, I have a OEM that wants to use the 42LH transaxel in a off road utillity vehical, and want us to make the adapter to go between the transaxel and the small diesel they want to use. I have all the small v8 patterns for the...
As a farm kid from Ne. I aways thought we were a bit strange up here, towing a 4x4 you kick the transfer case in neutral and go, anything else GO'S on the trailer!
With the exception of pulling the 4x4 out of the mud with the tractor and getting them to hard ground.
SBI
Central Ne.,USA
GO BACK to the foundry and tell them what you want and were
say a AFS 120 finnish on what side, they have the equepment to sand and grind much faster than you do!
All foundry work off a surface finnish that is related to the machine finnish scale used in a machine shop
SBI
Central Ne.,USA
I found a good retro fit for the 1/2 ton. It is a brother to the 2.8 used in the jeep. a V6 3.0 liter with 210 hp@3200 & 367 ft/ls @1600 made by VM motroi aka Detroit/ DCX and used in Europe.
we can make the adapters to fit it in any truck, I have not found a source to buy them in small...
Dont forget 713 as it ages it gets stronger, 21 days and it normally hits 36K t x 26K yeild also machines very well
we use it for almost all high strenght apps we run into
But it will srink if you do not no how to rigg the pattern!
SBI
Central Ne.,USA