Search results for query: *

Cowski, Thank you! That Worked!

Hello. I opened up an assembly this morning, and all of the file names in the assembly navigator have <file name> around them. This is seemingly a new one for me. Load options are As Saved, and Fully Loaded. UGNX2306. Thanks in advance.

Cowski, Thank you! That worked. I did rename that file, and now its pointing to where it needs to go. The export is working again. Have a great day!

Hey everyone. UGNX 1953, I recently have had an issue with a journal file, that exports a BOM Partslist to a TXT file. We then import that TXT file into Excel for your procurement folks. Weve been running this for about 5 years and all of the sudden I am getting errors on executing this...

Hello, I'm currently using NX1953 and just recently I am noticing a sorting problem using partslists or bill of materials. I have my defaults set so that the Assembly navigator sorts Alphnumerically by the part name, its been this setting for years. Normally when I make a drafting view, I...

In the Studio Spline dialog box, about mid way down, are three options for Movement, I selected View, and the spline stayed with the view. WCS was the default selection.

Solved it!

Morning. OK so here is a new one that 1953 has given me. When we export a drawing sheet as a PDF we name it exactly the same as the UG file name. Our part number convention is "0000.12345.10.prt" We have a series number, a numerical drawing number, and a two digit machine shop code. There...

Hello, We recently just upgraded from 1899 to 1953. In the 1953 Drafting environment, I am trying to create a break out view using the active sketch view command. Typically I like to use a spline to create a shape around the part I'd like to break out as its usually one entity to select and i...

One thing to note.....we do all our drafting sheets in Monochrome. I did change colors for giggles to black, and all the lines appeared to be "bold" When I changed the color to pale gray, they seemed to be thin after printing to PDF.

Cowski, Not necessarily all the drawings, but recently I'd say more than 80% of them. All new drawings created from this particular template, anything older than the template not necessarily.

Hello. I have a template file that has a lineweight setting that is giving me a hard time. When I print a drawing I get one of the extension lines on all linear dimensions shows as a thicker lineweight than the rest of the dimension. I have tried to edit the dimensions lineweights by right...

Cowski, Thank you, I found it probably the same time you replied.[smile] Kenja824, After I changed the setting, I promptly saved my user role. Today after opening a fresh session of UG, its still set to FIT.

Good Morning. Recently I have had an issue with UGNX 1899. Prior to this issue, when I hit CTRL F, the modelling view would fit the model to the field of view, no matter if it was a small part, or a large assembly. The same would happen with the HOME and END keys, I would get a zoomed to fit...

Morning Everyone! I was able to figure this out. Turning off "Delay Evaluation" in the customer defaults. So now when I place a dimension, and type in the value I want, the sketch geometry snaps to where I want it. I hope this helps anyone having this issue.

Morning everyone. I am having a new to me issue in NX1892. Recently when I make a sketch on a part, and I add dimensions to the sketch, the geometry does not move to the entered dimension number. For example: I make a block, and add four holes, using the sketch environment, I place four...

Morning everyone. My company just got a single seat of Solidworks 2019 for a specific customer project. I have been using UGNX for 12 years, and this is my first run with SW in many years. I have opened the customer models, which is an assembly line. The main assembly is composed of a...

Solved! my quick toggles for "Selectiion Group" had "control point" turned off.

Hello. So my NX11 has just started doing something strange. During a drafting session, I cannot select center marks or center lines with the ordinate dimensions. I can however select these items with the standard rapid demensions. Ordinates will select objects such as hole centers and lines...

Thanks Jerry, I tried that, but it didnt do anything. I gave up and restarted my computer and its fine now. Must have been some sort of glitch. Thanks, have a great day.