Search results for query: *

Good morning Thank you once again for your help I was thinking to swap cables from b to z but it's too short just to eliminate the cable issue but I think I will have to order another cable from fanuc and try Kind regards Keane

Hi ,so I unlocked it. By removing the bottom plate where cone screws on . Managed to set parameters ,my machine worked well for 3 hrs but now I'm getting z axis alarm Bare in mind before it was b axis I've changed the encoder cable and Amp 3 card drives b and z Axis . I'm not sure what to do...

Hi there , I've tried this ,I turned either way but you don't physically see any gap on the lense I managed to bring it down from 21.00 b axis value all the way to 20 .00 and the screw stops moving and screw driver starts to slip , it looks like it's literally locked no physical movement at all

Hi there ,okay long story short it seems that my b axis is jammed There is literally no gap between the two points that you mentioned above I'm going b axis abnormal current alarm And interloc b Any suggestions?

Good morning Thank you will give it a good Really appreciate it

Thank you so much for this info ,I understand everything clearly ,would you be able to educate me on how to open the parameters menu?

Hi okay cool,how would I reference the b axis ?

Good morning from South Africa Long story short I've had some 364/369 fanuc alarms on my f04020 nt laser machine . Got advise to replace b axis encoder and cable those were not the issues I've driven 16 hours straight to Fanuc to get a Amp 3 ( b axis z axis) card. Amada guys are very reluctant...