Activate Keypreview in your form
Then at myForm_KeyPress
check for the keys and activate the button according to the key
It will work also clicking the buttons
Almost every thing in QB will work in VB6, except
Input-Output From-To the screen.
But there are much more functions in VB6, I.E. to validate a date just use IsDate(myDate$).
I sugest you to read the VB6 help
Assuming you motor is unloaded when you power it, at the very begining the source will see the motor as a resistive load with no induction at all, so at the very begining the power factor will be 100%.
As the motor acelerates (unloded) it will build up inductive load moving the power factor...
peebee:
of course I dont run the ground wire with phase wires.
Once the naked wire begins oxiding the CuO acts like a protective layer for the core.
Every one have seen 40+ year old distribution lines exposed to wheater and working.
I ssume you are using asynchronous communication and 8-bit bytes with one start and one or more stop bits.
A rate of 20833.333 b/s gives a 48 uSec time periord for a bit.
nearest standard rate is 19200 b/s wich gives a 52.08333 uSec time period.
the shifting after 9 bits (Start bit + 8-bit...
For a grounding wire, I use as thumb rule half the cooper in the phase wire and always a naked wire, because there is no rubber or PVC to be melted, it makes possible to support very high temp. (350 C)
Also, grounding must be as close as possible to the electrical device.