That's a bit large from what I would want. Ideally I'm looking for something around 5000 btu/min heat removal, running around 5-10 gpm, under low pressure(10feet head). Would an automotive V8 or pick up truck radiator be adequate. I've been searching high and low, but can't really dig up any...
I'm piecing together a cooling system for an engine test lab, and am looking at using a transport truck radiator. Does anyone know approximate flow rates and pressure drop for these? I've been looking all over the web and without luck. I know that they can dissapate around 10,000 Btu/min, which...
Hello,
I am looking for some information on the start-up and transient condtions of an air conditioning or refrigeration cycle. I know how to calculate the steady state operation of the refrigeration cycle. However, I am unaware on what happens when the AC cycle is started and how long it would...
I'm actually looking at some softwares right now. I would be interested if anyone has had experience with these mostly in the simplicity to use, features, etc. I am focusing on injection rather than tweaking with the engine.
Wave
www.software.ricardo.com
AMESim
www.AMESim.com
EngineSim...
I have looked at both those injectors.
The evinrude injectors use Ficht injection, which uses a solenoid to rapidly hammer the fuel, which generates the high pressure at the injector. This would not work when trying to maintain a high pressure throughout the system to maintain LPG as a liquid...
I have looked at both of those injectors previously.
Evinrude's injectors are Ficht type injectors that produce the high pressure at the injector from a rapid solenoid hammering the fuel to high pressures. I don't see this working for LPG, because the high pressure needs to be maintained...
turkeyokato, thanks for the link. I had pretty much the same information as you,
Franzh, you seem to have a good background in this area, would you know of any liquid phase LPG injectors or automotive injectors that would work at the necessary high pressures to maintain the lpg as a liquid? I...
Turkeyokato-
I am working on a similar project, of LPLI system. It is a lower power generator application, but I would be interested in seeing the replies of the injector companies that you do have. I have looked at many injectors but only able to come up with one or two that might be feasible...