Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. dougthewelder

    Amada 3015 problems with 1/4" stainless

    Thanks for all the feed back. We got the problem figured out. We did a mode burn test and found that one of the output mirrors in the resonator had a burn on it. Cleaned all the optics and realigned. Runs better now than it ever did before!
  2. dougthewelder

    Amada 3015 problems with 1/4" stainless

    These are the parts. Everywhere there is a grind mark is where it stopped cutting through.https://files.engineering.com/getfile.aspx?folder=671be7e7-d051-458c-958b-3e03abab68dd&file=IMG_20181117_114246355.jpg
  3. dougthewelder

    Amada 3015 problems with 1/4" stainless

    We are using cut condition 3, and using nitrogen. Attached are the cut conditions. https://files.engineering.com/getfile.aspx?folder=db043900-4954-4c3b-b6c9-e44826a2b0b7&file=IMG_20181119_080846795.jpg
  4. dougthewelder

    Amada 3015 problems with 1/4" stainless

    Hi every one! Hopefully someone here can help me. We are having trouble cutting a 1/4" stainless job on our FO 3015 NT. This is the first time we tried this material. Before we started cutting the parts I did some test parts at the far end of the sheet. First parts came out Perfect! When we try...
Back
Top