Ho FEA WAy,
My simulation for laser based and FDM based process is working well, creating frames and all, but to see the results with any Primary NT11 or Eactive state its giving an error, as attached below, I am using Abaqus/CAE 2019.
okay thanks, so the idea of their assumption, for example layer height (as it have same width and height) from real life printing, and an approximate same size of mesh would be authentic?
Hi FEA WAY,
I am simulating FFF process, and following the knowledge base examples of Mobius Arm, where i can define bead height and width as you said for LDED example set in ABQ_AM_MaterialDeposition_Bead parameter table, but i want to know based on what background knowledge we can select the...
Hi all,
Can you clarify, for AM-process simulation within AM-plugin, how to characterize a bead width and height?
What i understood, if my layer height(from prinitng parameters) is: 0.2mm and in abaqus my Hex DC3D8 element size is also: 0.2mm so i can say my bead width and height is 0.2mm. Is it...
Hi,
FEA WAY, I have tried but not found the plugin Utility you mentioned, following is the link I used:
https://help.3ds.com/2020/english/DSSIMULIA_Established/SIMACAECAERefMap/simacae-c-plgregistermodules.htm?ContextScope=all&id=ed7f2f13e5d048d4b435182ac167cda6#Pg0
Thanks if you have link to...
Hi,
@owner21 and FEA Way, could you please share the files here to convert g-codes into eventseries? mean I didn't found a right file yet to do this and if there is any tutorial or guidelines please do share.
Thanks in advance!
