Search results for query: *

So does anyone know if there is a bearing I can safely use in place of the 6202-2RZ? The grinder is well below the maximum speed of the 2RZ. Or does someone know where I can purchase (for a reasonable amount, including shipping) a single 6202-2RZ bearing? Timken makes them, but I cannot find...

Thank you very much for the replies. The speed of the grinder is 3600 rpm

Hello everyone! I am trying to replace a bearing in a bench grinder. The bearing that came in it is a 6202-2RZ bearing, and I cannot seem to find many retailers, and when I do, they have very high shipping costs, as they are all outside of the USA. I do, however, see a lot of 6202-2RS bearings...

Hello everyone! I am currently trying to add a concentricity tolerance to the center bore of a gear, using the outer diameter as a datum, similar to what is shown here: http://www.gdandtbasics.com/concentricity/ I am using pro/e wildfire 3.0. How do I assign the outer diameter as the datum...

Thank you for the input! With all of that being said, is there anything you can recommend to prevent/resolve the issue? It does not happen all of the time, but has become more and more common as time passes. For this reason, I am inclined to believe that it has to do, in one way or another, with...

So what would cause the corruption? And how do I prevent/fix it? It is happening to all just about every assembly now.

I should also note that most recently, after adding explosion lines to 4 pages, when I clicked "save", the lines on every page other than the current page were deleted.

Thanks for the input. So why has it gotten worse over time? IF that is the case, then wouldn't an uninstall/reinstall remedy the problem for a little while? Also, the 2 other engineers, who have worked here for longer than I have, have never had these issues.

Hello all! To start, I am using Pro Engineer Wildfire 3.0. In the passed 2 or so months, I have been experiencing problems of escalating degrees relating to explosions. I have been creating explosion lines the same way for about 2 years now, and just recently have I started having problems. It...

I apologize for not responding soon. That project got pushed back and I kind of forgot to come back here. Yes, I am trying to join 3 tubes to a sharp point.

Hello everyone, I am currently trying to model a tubular frame in Pro E wildfire 3.0. The frame a rectangular prism, and I am trying to model one of the corners consisting of 3 tubes welded together at 90*. I do NOT need to include the actual weld, but rather just the overall shape and geometry...