My machine and the nitinol simulator have the same gear ratio of 1:3
If you unbend the nitinol simulator and connect the gears with a chain, the result from the difference in revolutions will be the same.
A chain drive between wheels is the absolutely the same as a direct clutch between gears...
I understand you.
But the nitinol motor also has gears with a ratio of 1:3
It's just that in my device the gears are connected by a chain because they are at a distance.
And in the nitinol motor the gears are brought together because the device is bent and wheel 1 and wheel 2 are now almost...
1. Wheel 1 and Wheel 2 are both attracted when the corrugated elements are compressed and the chain of them begins to shorten under the pressure of the water.
Both wheels tend to rotate towards each other.
Because the compressed chain of corrugated elements pulls them both towards itself.
But...
I will definitely post a video of the working device when I build it.
I work a lot to earn money for it.
And so the building work is not moving quickly.
No, it won't jam.
Because the chain tends to lengthen at the top of the machine due to its stretching by the air pressure that comes along the chain from below from the compressed corrugated elements.
And at the bottom, the chain shortens its length by three times due to compression.
This is...
I'm currently building the apparatus.
I'm a little short of money to rent a house with a pool.
The apparatus works in water, after all.
When I build the apparatus, I'll probably rent a house with a pool by the day.
Now I have only managed to build a small stand for research and testing of...
The rotation of the device will be clockwise.
Wheel 1 pushes down the corrugated elements full of air.
Because the pressure exceeds the buoyancy force of the air-filled corrugated elements.
The figure shows that there are only three of them on wheel 1.
And they also have the weight of...
Water only creates pressure due to the gravity of the planet.
Water even will be warmer because the frictions when move.
This device will gradually slow the rotation of the Earth.
The same thing is now done by waves in the oceans.
This will be unnoticeable for hundreds of millions of years.
So...
The pressure force compressing the corrugated elements at the lower level of the apparatus is stronger than the buoyancy force of the corrugated elements full of air.
The figure shows that only three corrugated elements are full of air on wheel 1. Their buoyancy is not enough to stop the...
Water pressure is the power source for pulling 'air filled corrugated elements' from the surface of the water to a depth of 1m.
The squeezing corrugated elements at the bottom of the apparatus pull both wheels towards themselves.
Because the chain of corrugated elements shortens its length...
The squeezing corrugated elements at the bottom of the apparatus pull both wheels towards themselves.
Because the chain of corrugated elements shortens its length under the water pressure.
Wheel 1 has a stronger gear and therefore rotates the entire apparatus towards wheel 2.
As a result, wheel...
No, it's the other way around.
The air-filled corrugated elements are pushed down to the lower level by wheel 1.
There they are compressed by pressure, generating the thrust of the apparatus.
After they are compressed, the corrugated elements go back up through wheel 2.
At the top, the air...
The water pressure at the lower level of the apparatus is the source of pressure.
At the bottom of the device, the water presses and compresses the corrugated elements and they create the device's thrust.
No, it's the other way around.
The air-filled corrugated elements are pushed down to the lower level by wheel 1.
There they are compressed by pressure, generating the thrust of the apparatus.
After they are compressed, the corrugated elements go back up through wheel 2.
At the top, the air...
This is simply using the pressure of the water column.
The pressure compresses the chain of corrugated elements at the bottom of the apparatus.
The chain pulls both wheels, but one wheel loses and therefore the chain moves in one direction and turns both wheels.
The pressure forces exceed the...
Because wheels have different gears 3:1And the corrugated elements chain shrinks at bottom level three times and expand back on top level.
That's why on top level chain moves faster three times and need three times faster rotating wheel to work with it.
Very looking forward for questions about...
This is the gravity engine.
I know, any competent engineer will immediately say that this is impossible.
He will not even look at my engine.
But I hope that you are curious enough and you will take a look.
The whole structure in the picture is immersed in water (you can use any non-viscous...
