amec2004 (Aeronautics)
Again thank you so very much for your excellent replies.
Couple more question:
I see that idlers sit everywhere not necessarily on the panel points of the truss conveyors? is that okay?
Or in gallery conveyors the conveyor gallery assembly sits on bottom truss struts...
amec2004 (Aeronautics)
Thank you so very much for generously sharing your knowledge and the photos.
As I love this specialty and learn you are excellent at it. Couple more questions - may be dumb questions
May I ask if you know the reason that why the bents get narrower at top. What's the...
amec2004 (Aeronautics: Thank you very much for great information. And my apology for bugging and questioning.
When you said, "We normally design the bent as panel, not tower, and all longitudinal force go to drive station or last bent touching the ground."
Do you mean the bents are not stable...
amec2004 (Aeronautics)
So could you please if you can show me in conveyor industry what a pin/hinge looks like on top of the bent and what a roller/ rocker looks like on top of bents and is slide support same as a roller?
Why the make the legs of the bents slopes rather that complete vertical...
WARose (Structural)
Thank you for your comment. The manufacturer is out of business and no drawings are available. It is all on me to decipher.
That's why I am trying to learn it. May I ask the slide support you refereed is the roller or is different animal?
Without drawings how to figure out...
Agent666 (Structural),
Thank you so much for taking time to respond and include photos. I greatly appreciate it.
Since you had experience in design of conveyor support structures, I will extend more questions
1- Do we design conveyors in a way/lengths that simply supported spans between the...
I am looking for a source that kind of explain structural design of conveyor truss and trestles.
Also kind of struggling understanding the supports of conveyor on top of trestles? Whats a fixed support will look like and what a roller will look like on top of trestle?
How are these trusses just...
My opinion is simplicity is the best Fig A due to lateral loads in one direction puts all bracings at a same time in compression or tension. Fig B instead creates inconsistency in the nature on bracings, two will be in one nature (Tension, or Compression)and middle story bracing will act...
Rabbit12 (Structural)
(OP)
Can you ask field people to take couple pictures, maybe one showing the vessel and the base of it and one closeup pic of the base of vessel.
I have done repair of chair anchors so I can direct you better after seeing the actual state of it.
Anybody has any experience in inspection in Coal yard?
Where to start first? where to look first?
There is a lot to inspect
How to manage and put an order
Thank you
Did I ask too much guys? Sorry? Just try to learn and understand. Didnt mean to take too much of your time. Just dont know where to find answers to my questions.
dik (Structural), sorry I didn't understand your response.
Thanks to all reviewer of the ad and the responders.
Also, I forgot to ask, with two trolleys case, are there any requirement how the load is attached? If two trolleys picking one load, should be only with vertical slings or it can be angled slings to each trolley?
Is the two trolley case applicable for two separate loads each individually with...
CCox (Structural): Thank you for your response and sharing your experience with me. Since, this is new subject to me first question is why they use two trolleys? Or in other words in what cases or for what purposes they use double trolley? Also, unfortunately I don't have any software to model...
Is monorail with two trolley possible?
I haven't seen monorail with two trolleys, any pics? Any publication and reference material about structural design of the monorail with two trolleys?
I appreciate if anybody had dealt with this in past helping me out
Respectfully,
Sk
