Search results for query: *

if you have a data , you can plot it in Python to generate EPS format very easily with desired resolution, you can also ask ChatGPT if you don't do it by yourself.

@Nir K no problem, looks like you had more experience in machining process simulation with Abaqus. I just worked several tasks about that, I am willing to learn more from you. please contact me at adil.memet@protonmail.com. Kind regards Adil

you don't need to use subroutine for that, I also worked the same problem just for fun, like FEA way said, you just need to use Damage Model (J-K model and select element deletion after damage).

Thanks for your information

Dear All I have a question about from Abaqus Inp file to Python Script. the other day, I was searching the internet and found some interesting stuff, perhaps some of you made it already. my question is to if there is an easy way to modify the Abaqus Inp and change into Python Script, so that...

Dear All, I have a simple question about boundary mesh og geometry, I have STL surface mesh data and after converting it to Solid mesh data and also selected second order accuracy still getting such kind of information boundary mesh element is linear as follows: 36084 elements have been...

Thanks

you can use Animate Scale factor or Harmonics near the Animate Time History bottom in Abaqus result to show how it works. if you really want to understand the mathematics of FEM, I would recommend to watch some video about Numerical Method of Engineering problem from MIT OCW ware website.

Thank you very much for your quick reply. yes, your are right, I took Mpa as give in the Table below. what is the units I got for Amplitute in this case ? micrometer or millimeter ? Thank in advance

Dear all, I have a new question about results from Modal analysis, after performing Modal analysis , I've done Frequency Regponse Analysis of the geometry and there is some thing still not clear for me. after FRF , there is graphics (Displacement vs Frequency. I was wondering what is the...

I found the solution for, the problem was the geometry dimension was not correctly defined for material parameter input, units are not fit (S.I unit system mixed up with S.I(mm)for material parameters input) . after correcting , it shows the correct result. Thanks Best regards Adil

Thanks for your reply and yes, I checked the Mode shapes, it looks normal at the range of first 15 or till 50 Mode, after that, the result is bit strange, the geometry is simple plate or shell element.

Hello every one! I made a simulation for Modal analysis of given geometry in Abaqus, as I simulate the first 10 Modal value is almost acceptable, shown as below : but when I want to run simulation of Modal value let's say from 489Hz , the Modal value is looks bit strange, as it is differ...

Thank you very much for your quick reply and tool is not included in the simulation, while other group makes the expriment and I got dexel model from them. I just want to add moving heat at the same step of element removal speed, but the thing is moving heat should be calculated from given data...

Dear All I have a some simple question about changing Temperature profile estimation in the work piece during Milling process, which is generated in contact with Milling tool, I was wondering how to simulate the moving heat in this case, material removal process I made it with AM plug-in with...

Hello Mr Mostafa I tried to your model to test it how it works, could you please share the strcture model as if possible? I'm also interested in AM simulation. thanks

Thank you much for your comment, I got the STL data from other group, it could be possible to reduced number of triangles in the case of simple or flat surface, in my case, during milling process, it has many area where, surface has to use higher number of facets to capture reliable surface...

Dear Friends, I am writing this because, I would like to share some of my experience of working with STL data format Importing it into Abaqus and run FEM simulation, recently, I found a way to deal with STL data problems, mainly, STL data conversion into solid mesh data. in my case, I have a...

Hello, Thank you very much for your tips regarding to remove process, in some cases, I just have one single point problem like the one shown in the below, how to remove that one single point or line elements from the converted geometry. Thanks in Advance. in the case of line mesh problem...

I think if you check for the certified for 3D CAD system or Simulation certified Workstation, you could be to find the answer such as the HP Z8 G4 Workstation - 16 Core - 3.3GHz, Intel Xeon Gold 6234 - 96GB RAM - NVIDIA Quadro RTX 4000 8GB and you can build by yourself. Good luck.