Search results for query: *

Thank you again! Very useful! Cheers

Thanks alot Guidoo, I have another question to bother you with. Can I setup the list box so that when a perticular cell has a certian number in it the list box gives me a certian range of options? Forinstance, if a cell has a number 1 in it, the list box has say a list of cars in it. Or if the...

Oh OK, and after I do this I assume I reference the formula to the new cell that the menu is linked to? Thanks! Valintine.

Sorry in advance for this probably easy question, but could anyone let me in on the secret of linking the contents of a drop down menu with the input of a fomula. IE. I know how to create a drop down menu, but I can't figure out how to lik the information in the menu to a cell/formula. For...

You are not really reducing the stress in the material, rather reducing the stress at a given point, and as you say redistributing it to the rest of the material! This works well as it is always better to distrubt the stresses rather than have a build up in one area leading to failure! This...

I thought that might be the general reply! Thanks for your help.

Sorry I should have said, I am only using SW01!

Does anybody know, if it is even possible, how to make gears or cogs, so that they are in a correct mesh, and is it possible to create a mate which alows rotation of one gear and the one mated to it responds by rotating to maintain the correct mesh? I was thinking a marco might work but I have...

It worked fine! The deflection was only about .2 of a mill. I auctually used two rails and a power screw so the three of them each took there own streeses and strains!

Thanks for your help! that was exactly what the problem was, and that was the solution i used! thanks again!!

Hey vahanyan Dia. 100mm and 300mm high, any help would be apriciated!

I am trying to work out how to calculate the bending moment in a linear bearing, and I can`t seem to find any formula or information on the topic. I would be most grateful if someone could help!!

I`m designing a cylinderical robot to lift a pay load of 10kg, and i was wondering if anyone could help with the design of the gripper. the payload has to be lifter off of an assembly line rotated through 90 deg. and placed into a horizontal chuck. I need to know about friction between the...